National Stock Number
5340-01-021-7180
National Stock Number (NSN) 5340-01-021-7180, or NIIN 010217180, (standoff,threaded,spacing) was assigned May 18, 1976 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.
There is only one manufacturer part number associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by one supplier. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.
This part number has not been procured by the US Government in over 5 years.
This NSN is unique to one weapons system.
Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Apr 26, 2008, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The annual buy value of this part falls below the screening threshold of $10,000 but it has been screened for known source(s). (NOTE: This code shall not be used when screening parts entering the inventory. It shall not be assigned in preference to or supersede any other AMSC.) Valid AMCs: 1, 2, 3, 4 and 5.
This NSN is assigned to Item Name Code (INC) 40280. [A STANDOFF THAT MUST HAVE A THREADED END(S) OR BE INTERNALLY THREADED ITS FULL LENGTH. FOR ITEMS HAVING EXTERNAL THREADS ON BOTH ENDS, SEE STUD (AS MODIFIED). FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME FOR THE ENTIRE LENGTH, ARE FLAT ON TOP AND BOTTOM, HAVING INTERNAL THREADS ITS FULL LENGTH, AND THE LENGTH DOES NOT EXCEED TWICE THE WIDTH ACROSS THE FLATS OR OUTSIDE DIAMETER, SEE NUT (AS MODIFIED); USE MAXIMUM DIMENSIONS(S) FOR COMPLIANCE.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340010217180 contains an unknown precious metal.
This information was last updated on May 01, 2024.