ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-01-035-8249, 5340010358249
BRACKET,DOUBLE ANGLE

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 010358249
Codification Country
United States
Item Name Code
INC 20354
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-01-035-8249
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-01-035-8249


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-01-035-8249

National Stock Number (NSN) 5340-01-035-8249, or NIIN 010358249, (bracket,double angle) was assigned February 16, 1977 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by one supplier. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Dec 17, 2013, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. This part requires engineering source approval by the design control activity in order to maintain the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 20354. [A RIGID ITEM USUALLY FABRICATED FROM FLAT MATERIAL, FORMING TWO ALTERNATE OR TWO ADJACENT INTERIOR ANGLES, BOTH WHICH MAY BE LESS THAN 180 DEGREES (3.141 RADIANS). IT IS DESIGNED TO POSITION, ALIGN, AND/OR SUPPORT AN ITEM. IT MAY BE REINFORCED. SEE ALSO BRACKET, ANGLE AND BRACKET (1), MOUNTING.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340010358249 does not contain precious metals.

This information was last updated on .


Technical Characteristics

FABRICATION METHOD (NON-CORE)
(AARN) FORMED
CENTER SECTION THICKNESS
(AHQB) 0.056 INCHES MINIMUM AND 0.062 INCHES MAXIMUM
CENTER SECTION WIDTH
(AHQA) 0.545 INCHES MINIMUM AND 0.575 INCHES MAXIMUM
FABRICATION METHOD
(AARN) FORMED
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
(AHRB) 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
(AHRA) 0.270 INCHES MINIMUM AND 0.290 INCHES MAXIMUM
FIRST LEG ANGLE
(CSSQ) 15.0 DEGREES NOMINAL
FIRST LEG THICKNESS
(AHPW) 0.056 INCHES MINIMUM AND 0.062 INCHES MAXIMUM
FIRST LEG END RADIUS
(AJFP) 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM
FIRST LEG HOLE ARRANGEMENT STYLE
(AKAU) ONE HOLE
FIRST LEG HOLE DIAMETER
(AHLK) 0.216 INCHES MINIMUM AND 0.226 INCHES MAXIMUM
FIRST LEG WIDTH
(AHQN) 0.545 INCHES MINIMUM AND 0.575 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) AMS 5504 ASSN STD SINGLE MATERIAL RESPONSE
MATERIAL
(MATT) STEEL COMP 410
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
(AHLW) 0.270 INCHES MINIMUM AND 0.290 INCHES MAXIMUM
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
(AHLV) 0.270 INCHES MINIMUM AND 0.290 INCHES MAXIMUM
SECOND LEG ANGLE
(CSSR) 90.0 DEGREES NOMINAL
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH
(AHLS) 1.604 INCHES MINIMUM AND 1.624 INCHES MAXIMUM
SECOND LEG LENGTH
(ADLL) 2.471 INCHES MINIMUM AND 2.511 INCHES MAXIMUM
SECOND LEG RELATIONSHIP TO FIRST LEG
(CSSP) NOT IDENTICAL
SECOND LEG END RADIUS
(AJFQ) 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM
SECOND LEG HOLE ARRANGEMENT STYLE
(AKCU) TWO HOLES
SECOND LEG HOLE DIAMETER
(AHLN) 0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM
SECOND LEG STYLE
(AKBU) END RADIUS
SECOND LEG THICKNESS
(AHPX) 0.056 INCHES MINIMUM AND 0.062 INCHES MAXIMUM
SECOND LEG WIDTH
(AHLF) 0.545 INCHES MINIMUM AND 0.575 INCHES MAXIMUM
STYLE DESIGNATOR
(STYL) DOUBLE ANGLE
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH
(AHLS) 1.604 NOMINAL MILS AND 1.624 NOMINAL CENTIMETERS

Manufacturer Part Numbers


Related Inventory

G7678994
057059-10
Condition NE
Hvy Wl Shrink T
Readily Available
754476-78992

Condition NE
Brady Steel Bro
Readily Available
754476-78993

Condition NE
Brady Steel Bro
Readily Available
754476-78998

Condition NE
Brady Steel Sig
Readily Available
754476-78991

Condition NE
Brady Steel Bro
Readily Available


 
Top