ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-01-042-4960, 5340010424960
CLAMP,BLOCK,SECTION

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 010424960
Codification Country
United States
Item Name Code
INC 39404
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Request Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-01-042-4960
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-01-042-4960


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-01-042-4960

National Stock Number (NSN) 5340-01-042-4960, or NIIN 010424960, (clamp,block,section) was assigned June 11, 1977 in the Federal Logistics Information System (FLIS). NIIN 010424960 was cancelled on August 2, 2018, with a cancelled status of "Item is Cancelled WITHOUT Replacement." There is no known replacement specified for this stock number. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 2 suppliers. Today, 2 suppliers are listed as Active suppliers for this NSN. Of the active suppliers, there are no suppliers that are deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

This NSN is unique to one weapons system.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Aug 01, 2020, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The Government physically does not have in its possession sufficient, accurate, or legible data to purchase this part from other than current source(s). (NOTE: This code is applicable only to parts under immediate buy requirements and only as long as the deficiency is under review for resolution and appropriate recoding.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 39404. [A SINGLE PIECE OF MULTIPIECE CLAMP, BLOCK. FOR ITEMS SPECIFICALLY DESIGNED TO SERVE AS A GUIDE, SEE FAIRLEAD BLOCK AND FAIRLEAD SECTION, BLOCK. EXCLUDES:BRACKET, PIPE.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340010424960 contains an unknown precious metal.

This information was last updated on .


Technical Characteristics

CLAMPING HOLE DIAMETER
(CWWM) 0.188 INCHES MINIMUM FIFTH HOLE AND 0.190 INCHES MAXIMUM FIFTH HOLE
CLAMPING HOLE QUANTITY
(CWTD) 5
STYLE DESIGNATOR
(STYL) RECTANGULAR
DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH
(AFEC) 0.188 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN FIRST AND FIFTH CLAMPING HOLES
(CWYM) 2.180 INCHES NOMINAL
MOUNTING HOLE QUANTITY
(ABTJ) 2
CENTER TO CENTER DISTANCE BETWEEN FIRST AND FOURTH CLAMPING HOLES
(CWYH) 1.609 INCHES NOMINAL
MATERIAL
(MATT) PLASTIC
MOUNTING HOLE DIAMETER
(ABTB) 0.190 INCHES MINIMUM AND 0.196 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD CLAMPING HOLES
(CWYC) 1.101 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD MOUNTING HOLES
(AXPE) 3.062 INCHES NOMINAL
CLAMPING HOLE DIAMETER
(CWWM) 0.094 INCHES MINIMUM FIRST HOLE AND 0.096 INCHES MAXIMUM FIRST HOLE
CLAMPING HOLE DIAMETER
(CWWM) 0.094 INCHES MINIMUM SECOND HOLE AND 0.096 INCHES MAXIMUM SECOND HOLE
CLAMPING HOLE DIAMETER
(CWWM) 0.094 INCHES MINIMUM THIRD HOLE AND 0.096 INCHES MAXIMUM THIRD HOLE
CLAMPING HOLE DIAMETER
(CWWM) 0.125 INCHES MINIMUM FOURTH HOLE AND 0.127 INCHES MAXIMUM FOURTH HOLE
OVERALL WIDTH
(ABMK) 0.380 INCHES NOMINAL
DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER
(CWXN) 0.250 INCHES NOMINAL
DISTANCE FROM END TO FIRST MOUNTING HOLE CENTER
(CWXC) 0.562 INCHES NOMINAL
OVERALL LENGTH
(ABHP) 3.062 INCHES NOMINAL
MOUNTING FACILITY
(AZGM) UNTHREADED HOLE
BLOCK HEIGHT
(BYGG) 0.315 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND CLAMPING HOLES
(CWXZ) 0.624 INCHES NOMINAL


Related Inventory



 
Top