ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-01-071-8197, 5340010718197
BRACKET,ANGLE

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 010718197
Codification Country
United States
Item Name Code
INC 16900
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-01-071-8197
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-01-071-8197


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-01-071-8197

National Stock Number (NSN) 5340-01-071-8197, or NIIN 010718197, (bracket,angle) was assigned February 14, 1979 in the Federal Logistics Information System (FLIS). NIIN 010718197 was cancelled on November 2, 2016, with a cancelled status of "Item is Cancelled WITHOUT Replacement." There is no known replacement specified for this stock number. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by one supplier. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Aug 01, 2020, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The Government physically does not have in its possession sufficient, accurate, or legible data to purchase this part from other than current source(s). (NOTE: This code is applicable only to parts under immediate buy requirements and only as long as the deficiency is under review for resolution and appropriate recoding.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 16900. [A RIDGE ITEM, USUALLY OF FLAT MATERIAL, FORMED INTO A DIHEDRAL ANGLE (GENERALLY A RIGHT ANGLE) WHICH MAY BE REINFORCED; IT IS DESIGNED TO POSITION, ALIGN, OR SUPPORT AN ITEM(S) IN RELATION TO ANOTHER. EXCLUDES:BRACE (AS MODIFIED); BRACKET (1), MOUNTING; AND BRACKET, SHELF.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340010718197 contains an unknown precious metal.

This information was last updated on .


Technical Characteristics

FIRST LEG WIDTH
(AHQN) 0.750 INCHES NOMINAL
FIRST LEG CORNER RADIUS
(AHQP) 0.125 INCHES NOMINAL
SECOND LEG CORNER RADIUS
(AHLG) 0.125 INCHES NOMINAL
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
(AHRB) 0.280 INCHES NOMINAL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
(STDC) AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE
SECOND LEG THICKNESS
(AHPX) 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
SECOND LEG HOLE ARRANGEMENT STYLE
(AKCU) ONE HOLE
SURFACE TREATMENT
(SFTT) CADMIUM
MATERIAL
(MATT) STEEL COMP 410
SECOND LEG WIDTH
(AHLF) 0.750 INCHES NOMINAL
SECOND LEG STYLE
(AKBU) CORNER RADIUS
SECOND LEG RELATIONSHIP TO FIRST LEG
(CSSP) NOT IDENTICAL
FIRST LEG LENGTH
(ADLK) 1.540 INCHES NOMINAL
SECOND LEG HOLE DIAMETER
(AHLN) 0.216 INCHES MINIMUM AND 0.226 INCHES MAXIMUM
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
(AHLW) 0.250 INCHES NOMINAL
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
(AHRA) 0.375 INCHES NOMINAL
FIRST LEG ANGLE
(CSSQ) 90.0 DEGREES NOMINAL
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
(AHLV) 0.750 INCHES NOMINAL
FIRST LEG THICKNESS
(AHPW) 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
FIRST LEG STYLE
(AJZU) CORNER RADIUS
FIRST LEG HOLE ARRANGEMENT STYLE
(AKAU) ONE HOLE
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) AMS 5504 ASSN STD SINGLE MATERIAL RESPONSE
FIRST LEG HOLE DIAMETER
(AHLK) 0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM
STYLE DESIGNATOR
(STYL) ANGLE
SECOND LEG LENGTH
(ADLL) 1.600 INCHES NOMINAL

Manufacturer Part Numbers


Related Inventory

051115-41582

Condition NE
Standard Abrasi
Readily Available


 
Top