ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-01-071-8949, 5340010718949
HINGE,BUTT

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 010718949
Codification Country
United States
Item Name Code
INC 22894
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: We have 1 qualified suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-01-071-8949
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-01-071-8949


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-01-071-8949

National Stock Number (NSN) 5340-01-071-8949, or NIIN 010718949, (hinge,butt) was assigned February 16, 1979 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by one supplier. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

This NSN is assigned to Item Name Code (INC) 22894. [A HINGE USUALLY WITH RECTANGULARLY SHAPED LEAVES. THE DIMENSION PARALLEL TO THE HINGE PIN MUST BE GREATER THAN THE DIMENSION TRANSVERSE TO THE HINGE PIN. IT MAY HAVE A TENSION COIL SPRING AT ITS PIVOT(S) FOR CLOSING ACTION, AND MAY HAVE A THIRD MEMBER BETWEEN ITS PIVOT(S) TO PERMIT THE DOOR, OR THE LIKE, TO SWING IN AN ARC FROM EITHER SIDE.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340010718949 contains an unknown precious metal.

This information was last updated on .


Technical Characteristics

UNABLE TO DECODE
(ANNR) UNABLE TO DECODE
SURFACE TREATMENT AND LOCATION
(ANNR) CADMIUM, QQ-P-416, TYPE 2, CLASS 1 OVERALL
MATERIAL
(MATT) STEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL COMP 1020 OR STEEL BODY
MATERIAL AND LOCATION
(ANNQ) COPPER ALLOY, QQ-W-321, ALLOY 260, 270 OR 274 PIN AND STEEL, QQ-S-698 BODY
SURFACE TREATMENT
(SFTT) CADMIUM OVERALL
UNABLE TO DECODE
(ANNQ) UNABLE TO DECODE AND UNABLE TO DECODE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
(STDC) QQ-W-321, ALLOY 260, 270 OR 274 FED SPEC SINGLE TREATMENT RESPONSE PIN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
(STDC) QQ-P-416, TYPE 2, CLASS 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) QQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE BODY
HINGE MOUNTING TYPE
(AKER) FULL MORTISE
KNUCKLE QUANTITY
(AKEX) 8
KNUCKLE TYPE
(AKNB) FRICTION
OVERALL LENGTH
(ABHP) 4.000 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) UNABLE TO DECODE
MATERIAL THICKNESS
(ABPX) 0.040 INCHES NOMINAL
MOUNTING HOLE DIAMETER
(ABTB) 0.230 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
MOUNTING HOLE QUANTITY
(ABTJ) 4
PERFORMANCE TYPE
(AGLD) NOT RATED
PIN DIAMETER
(ABVV) 0.089 INCHES MINIMUM AND 0.093 INCHES MAXIMUM
PIN REMOVABILITY
(AKES) NONREMOVABLE
REVERSIBLE FEATURE
(AJNC) NOT INCLUDED
STYLE DESIGNATOR
(STYL) BUTT
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
(STDC) UNABLE TO DECODE
SURFACE TREATMENT
(SFTT) UNABLE TO DECODE
MATERIAL
(MATT) COPPER ALLOY 260 OR COPPER ALLOY 270 OR COPPER ALLOY 274 PIN

Manufacturer Part Numbers


Related Inventory

4179130
5340-01-071-8949
Request


 
Top