ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-01-082-7948, 5340010827948
BRACKET,ANGLE

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 010827948
Codification Country
United States
Item Name Code
INC 16900
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Request Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-01-082-7948
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-01-082-7948


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-01-082-7948

National Stock Number (NSN) 5340-01-082-7948, or NIIN 010827948, (bracket,angle) was assigned September 11, 1979 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. One of those part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 2 suppliers. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

This NSN is somewhat common among different platforms, belonging to 2 different weapons systems.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Sep 02, 2005, this NSN's acquisition method was noted as: Suitable for Competitive Acquisition. (Potential sources shall include dealers/distributors.) This part requires engineering source approval by the design control activity in order to maintain the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 16900. [A RIDGE ITEM, USUALLY OF FLAT MATERIAL, FORMED INTO A DIHEDRAL ANGLE (GENERALLY A RIGHT ANGLE) WHICH MAY BE REINFORCED; IT IS DESIGNED TO POSITION, ALIGN, OR SUPPORT AN ITEM(S) IN RELATION TO ANOTHER. EXCLUDES:BRACE (AS MODIFIED); BRACKET (1), MOUNTING; AND BRACKET, SHELF.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340010827948 does not contain precious metals.

This NSN is associated to Schedule B 8302500000: hat-racks, hat pegs, brackets and similar fixtures, and parts thereof, of base metal. The Schedule B End Use is listed as cell phones and other household goods, n.e.c.. NAICS classification category 337127: institutional furniture manufacturing.

This information was last updated on .


Technical Characteristics

FIRST LEG ANGLE
(CSSQ) 90.0 DEGREES NOMINAL
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
(AHRA) 0.353 INCHES NOMINAL
FIRST LEG HOLE ARRANGEMENT STYLE
(AKAU) 2 SLOTS
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH
(AHQU) 2.734 INCHES NOMINAL
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
(AHRB) 0.520 INCHES NOMINAL
FIRST LEG STYLE
(AJZU) SQUARE
FIRST LEG THICKNESS
(AHPW) 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM
FIRST LEG WIDTH
(AHQN) 3.087 INCHES NOMINAL
FIRST LEG LENGTH
(ADLK) 1.980 INCHES NOMINAL
FIRST LEG SLOT LENGTH
(AHLL) 0.650 INCHES MINIMUM AND 0.660 INCHES MAXIMUM
FIRST LEG SLOT WIDTH
(AHLM) 0.190 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) AMS 5599 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5666 ASSN STD SINGLE MATERIAL RESPONSE
MATERIAL
(MATT) STEEL CORROSION RESISTING
MOUNTING HOLE TYPE
(ACHY) COUNTERBORED AND THREADED
SECOND LEG END WIDTH
(AHLH) 0.600 INCHES MINIMUM AND 0.640 INCHES MAXIMUM
SECOND LEG HOLE ARRANGEMENT STYLE
(AKCU) THREE HOLES
SECOND LEG HOLE DIAMETER
(AHLN) 0.270 INCHES MINIMUM AND 0.284 INCHES MAXIMUM
SECOND LEG LENGTH
(ADLL) 0.900 INCHES NOMINAL
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
(AHLW) 0.570 INCHES NOMINAL
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
(AHLV) 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
SECOND LEG THICKNESS
(AHPX) 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM
SECOND LEG WIDTH
(AHLF) 3.420 INCHES MINIMUM AND 3.460 INCHES MAXIMUM
SECOND LEG OFFSET ANGLE
(CSSZ) 15.0 DEGREES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEG
(CSSP) NOT IDENTICAL
SECOND LEG STYLE
(AKBU) ANGLE
SPECIAL FEATURES
(FEAT) HOLE ON FIRST LEG 0.050 TO 0.060 IN. THRU AND ONE SMALL HOLE 0.190 IN. DIA TO 0.210 IN. DIA,COUNTERSINK 80 DEGREES TO 120 DEGREES,THREADED 190-32 UNF 3B; SECOND LEG FOURTH HOLE 0.270 IN. DIA TO 0.284 IN. DIA
STYLE DESIGNATOR
(STYL) OFFSET ANGLE

Manufacturer Part Numbers


Related Inventory



 
Top