ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-01-090-0641, 5340010900641
CLAMP,LOOP

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 010900641
Codification Country
United States
Item Name Code
INC 17532
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-01-090-0641
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-01-090-0641


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-01-090-0641

National Stock Number (NSN) 5340-01-090-0641, or NIIN 010900641, (clamp,loop) was assigned February 11, 1980 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by one supplier. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

This NSN is unique to one weapons system.

There has been very little demand for this national stock number. The demand for this NSN originated from less than 5 countries. Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Apr 26, 2008, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The annual buy value of this part falls below the screening threshold of $10,000 but it has been screened for known source(s). (NOTE: This code shall not be used when screening parts entering the inventory. It shall not be assigned in preference to or supersede any other AMSC.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 17532. [A CLAMP DESIGNED TO SURROUND OTHER ITEM(S) SUCH AS CABLE(S), CONDUIT(S), PIPE(S), HOSE(S), OR TUBE(S), AND TO FASTEN TOGETHER OR TO ANOTHER OBJECT OR STRUCTURE. INCLUDES STRAIGHT FLEXIBLE ITEMS. FOR ITEMS SPECIFICALLY DESIGNED TO CLAMP A HOSE TO A CONNECTION TO PREVENT LEAKAGE, SEE CLAMP, HOSE. SEE ALSO HANGER, PIPE AND CLIP, SPRING TENSION. FOR RETAINING STRAPS WITH A BRIDGE, SEE STRAP, RETAINING. EXCLUDES:CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340010900641 contains an unknown precious metal.

This information was last updated on .


Technical Characteristics

MATERIAL
(MATT) RUBBER CUSHION
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) QQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE BAND
MATERIAL
(MATT) ALUMINUM ALLOY 2024 BAND
CENTER TO CENTER DISTANCE BETWEEN LOOP AND LUG HOLE
(AZDE) 0.796 INCHES MINIMUM AND 0.828 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE
(AZCY) 0.765 INCHES MINIMUM AND 0.797 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND HOLES
(AKZC) 0.620 INCHES MINIMUM AND 0.630 INCHES MAXIMUM
DIAMETER
(ABMZ) 0.189 INCHES MINIMUM AND 0.209 INCHES MAXIMUM
DISTANCE FROM LOOP CENTER TO TONGUE END
(AZDC) 1.015 INCHES MINIMUM AND 1.047 INCHES MAXIMUM
FASTENING DEVICE TYPE
(AXWJ) LUG
LOOP INSIDE DIAMETER
(BZTN) 0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM
LUG HOLE DIAMETER
(BZTQ) 0.189 INCHES MINIMUM AND 0.209 INCHES MAXIMUM
LUG WIDTH
(AHMM) 1.265 INCHES MINIMUM AND 1.497 INCHES MAXIMUM
MATERIAL DIAMETER
(AJRB) 0.048 INCHES MINIMUM AND 0.054 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) UNABLE TO DECODE
MATERIAL THICKNESS
(ABPX) 0.048 INCHES MINIMUM AND 0.054 INCHES MAXIMUM
MATERIAL
(MATT) UNABLE TO DECODE
OVERALL WIDTH
(ABMK) 0.620 INCHES NOMINAL
STYLE DESIGNATOR
(STYL) RIGHT HAND CLAMP & BRACKET
TONGUE HOLE TYPE
(AAAL) ROUND, UNTHREADED

Manufacturer Part Numbers


Related Inventory

1YRD8
76812.R8.16
Condition NE
Machine Tool Wi
Readily Available


 
Top