ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-01-109-4992, 5340011094992
HINGE,BUTT

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 011094992
Codification Country
United States
Item Name Code
INC 22894
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Request Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-01-109-4992
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-01-109-4992


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-01-109-4992

National Stock Number (NSN) 5340-01-109-4992, or NIIN 011094992, (hinge,butt) was assigned March 16, 1981 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There are no manufacturer part numbers associated to this NSN.

This part number has not been procured by the US Government in over 5 years.

This NSN is assigned to Item Name Code (INC) 22894. [A HINGE USUALLY WITH RECTANGULARLY SHAPED LEAVES. THE DIMENSION PARALLEL TO THE HINGE PIN MUST BE GREATER THAN THE DIMENSION TRANSVERSE TO THE HINGE PIN. IT MAY HAVE A TENSION COIL SPRING AT ITS PIVOT(S) FOR CLOSING ACTION, AND MAY HAVE A THIRD MEMBER BETWEEN ITS PIVOT(S) TO PERMIT THE DOOR, OR THE LIKE, TO SWING IN AN ARC FROM EITHER SIDE.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340011094992 does not contain precious metals.

This information was last updated on .


Technical Characteristics

HINGE MOUNTING TYPE
(AKER) FULL SURFACE
KNUCKLE QUANTITY
(AKEX) 5
KNUCKLE TYPE
(AKNB) FRICTION
OVERALL LENGTH
(ABHP) 9.000 INCHES NOMINAL
MATERIAL THICKNESS
(ABPX) 0.090 INCHES NOMINAL
MATERIAL
(MATT) ALUMINUM ALLOY 5083 OR ALUMINUM ALLOY 5086 OR ALUMINUM ALLOY 5052 OVERALL
MOUNTING HOLE DIAMETER
(ABTB) 0.281 INCHES MINIMUM AND 0.302 INCHES MAXIMUM
RISING PIN
(AKET) INCLUDED
PERFORMANCE TYPE
(AGLD) NOT RATED
PIN CENTER TO BODY EDGE DISTANCE
(AKFK) 0.750 INCHES NOMINAL
PIN DIAMETER
(ABVV) 0.248 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
PIN REMOVABILITY
(AKES) REMOVABLE
PIN TIP STYLE
(AKEV) CONE
REVERSIBLE FEATURE
(AJNC) NOT INCLUDED
STYLE DESIGNATOR
(STYL) BUTT
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
(STDC) MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT
(SFTT) ANODIZE OVERALL
UNABLE TO DECODE
(ANNR) UNABLE TO DECODE
UNABLE TO DECODE
(ANNQ) UNABLE TO DECODE OR UNABLE TO DECODE OR UNABLE TO DECODE
MATERIAL AND LOCATION
(ANNQ) ALUMINUM ALLOY, QQ-A-250/6, ALLOY 5083 OVERALL OR ALUMINUM ALLOY, QQ-A-250/7, ALLOY 5086 OVERALL OR ALUMINUM ALLOY, QQ-A-250/8, ALLOY 5052 OVERALL
SURFACE TREATMENT AND LOCATION
(ANNR) ANODIZED, MIL-A-8625 OVERALL

Manufacturer Part Numbers


Related Inventory



 
Top