ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-01-115-5595, 5340011155595
RETAINER,HELICAL COMPRESSION SPR

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 011155595
Codification Country
United States
Item Name Code
INC 24327
Criticality
(F) This item is a Flight Safety Critical Aircraft Part (FSCAP).
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Request Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-01-115-5595
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-01-115-5595


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-01-115-5595

National Stock Number (NSN) 5340-01-115-5595, or NIIN 011155595, (retainer,helical compression spr) was assigned July 9, 1981 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 2 suppliers. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

This NSN is somewhat common among different platforms, belonging to 5 different weapons systems.

There has been very little demand for this national stock number. The demand for this NSN originated from less than 5 countries. Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Apr 19, 2017, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. This part requires engineering source approval by the design control activity in order to maintain the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 24327. [A CYLINDRICAL ITEM SPECIFICALLY DESIGNED TO FIT OVER THE END OF AND COMPLETELY ENCASE THE SPRING. THE OPEN END IS USUALLY FLANGED; THE OPPOSITE END MAY BE CLOSED OR HAVE AN ORIFICE TO ACCOMMODATE A GUIDE, PLUNGER, OR THE LIKE. IT IS USED TO POSITION THE SPRING AND RESTRAIN LATERAL MOTION. IT MAY PROVIDE A SEAT FOR THE SPRING. EXCLUDES:HOLDER,SPRING.]. This item is a Flight Safety Critical Aircraft Part (FSCAP). There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340011155595 does not contain precious metals.

This information was last updated on .


Technical Characteristics

UNABLE TO DECODE
(SURF) UNABLE TO DECODE
III FSC APPLICATION DATA
(ZZZV) ACFT WHEEL AND BRAKE SYSTEM
MATERIAL
(MATL) STEEL,QQ-S-764,CLASS 416
SURFACE TREATMENT
(SURF) PASSIVATED, QQ-P-35
END HOLE DIAMETER
(BWRC) 0.353 INCHES MINIMUM AND 0.355 INCHES MAXIMUM
BODY INSIDE DIAMETER
(ADAS) 0.750 INCHES MINIMUM AND 0.760 INCHES MAXIMUM
BODY OUTSIDE DIAMETER
(ADAR) 0.872 INCHES MINIMUM AND 0.874 INCHES MAXIMUM
CASEHARDENING INDICATOR
(AASG) NOT CASEHARDENED
FLANGE THICKNESS
(ABKU) 0.100 INCHES MINIMUM AND 0.120 INCHES MAXIMUM
FSC APPLICATION DATA
(ZZZV) ACFT WHEEL AND BRAKE SYSTEM
INSIDE CHAMFER ANGLE IN DEG
(BWRG) 30.0
OVERALL HEIGHT
(ABKW) 0.940 INCHES MINIMUM AND 0.950 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) QQ-S-764,CLASS 416 FED SPEC SINGLE MATERIAL RESPONSE
MATERIAL HARDNESS RATING
(ALME) 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
MATERIAL
(MATT) STEEL COMP 416
MOUNTING HOLE DIAMETER
(ABTB) 0.090 INCHES MINIMUM AND 0.100 INCHES MAXIMUM
STYLE DESIGNATOR
(STYL) IRREGULAR
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
(STDC) QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
SURFACE TREATMENT
(SFTT) PASSIVATE
UNABLE TO DECODE
(MATL) UNABLE TO DECODE
MATERIAL
(MATT) STEEL,QQ-S-764,CLASS 416

Manufacturer Part Numbers


Related Inventory



 
Top