ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-01-133-5308, 5340011335308
BRACKET,DOUBLE ANGLE

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 011335308
Codification Country
United States
Item Name Code
INC 20354
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: We have 1 qualified suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-01-133-5308
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-01-133-5308


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-01-133-5308

National Stock Number (NSN) 5340-01-133-5308, or NIIN 011335308, (bracket,double angle) was assigned June 16, 1982 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There are 3 manufacturer part numbers associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by one supplier. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, there are no suppliers that are deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

This NSN is somewhat common among different platforms, belonging to 2 different weapons systems.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Sep 02, 2005, this NSN's acquisition method was noted as: Suitable for Competitive Acquisition. (Potential sources shall include dealers/distributors.) The Government has unlimited rights to the technical data, and the data package is complete. Valid AMCs: 1 and 2.

This NSN is assigned to Item Name Code (INC) 20354. [A RIGID ITEM USUALLY FABRICATED FROM FLAT MATERIAL, FORMING TWO ALTERNATE OR TWO ADJACENT INTERIOR ANGLES, BOTH WHICH MAY BE LESS THAN 180 DEGREES (3.141 RADIANS). IT IS DESIGNED TO POSITION, ALIGN, AND/OR SUPPORT AN ITEM. IT MAY BE REINFORCED. SEE ALSO BRACKET, ANGLE AND BRACKET (1), MOUNTING.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340011335308 does not contain precious metals.

This information was last updated on .


Technical Characteristics

III END ITEM IDENTIFICATION
(AGAV) 2350-01-091-5405 CARRIER MLRS; MULTIPLE LAUNCH ROCKET SYSTEM (MLRS)
END ITEM IDENTIFICATION
(AGAV) 2350-01-091-5405 CARRIER MLRS; MULTIPLE LAUNCH ROCKET SYSTEM (MLRS)
CENTER SECTION HEIGHT
(AHPZ) 1.620 INCHES NOMINAL
CENTER SECTION THICKNESS
(AHQB) 0.125 INCHES NOMINAL
CENTER SECTION WIDTH
(AHQA) 10.130 INCHES NOMINAL
FIRST LEG HOLE ARRANGEMENT STYLE
(AKAU) NO HOLE
FIRST LEG ANGLE
(CSSQ) 90.0 DEGREES NOMINAL
FIRST LEG CUTOUT LENGTH
(CWMX) 0.750 INCHES NOMINAL
FIRST LEG CUTOUT WIDTH
(CWMZ) 1.380 INCHES NOMINAL
FIRST LEG LENGTH
(ADLK) 4.560 INCHES NOMINAL
FIRST LEG STYLE
(AJZU) CUT OUT
FIRST LEG THICKNESS
(AHPW) 0.125 INCHES NOMINAL
FIRST LEG WIDTH
(AHQN) 10.130 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) QQ-A-250/7 FED SPEC SINGLE MATERIAL RESPONSE AND QQ-A-250/6 FED SPEC 2ND MATERIAL RESPONSE
MATERIAL
(MATT) ALUMINUM ALLOY 5086
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH
(AHLP) 8.620 INCHES NOMINAL
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
(AHLW) 0.500 INCHES NOMINAL
SECOND LEG ANGLE
(CSSR) 90.0 DEGREES NOMINAL
SECOND LEG CHAMFER ANGLE
(CWPG) 45.0 DEGREES MINIMUM AND 90.0 DEGREES MAXIMUM
SECOND LEG LENGTH
(ADLL) 1.310 INCHES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEG
(CSSP) NOT IDENTICAL
SECOND LEG SLOT LENGTH
(AHLZ) 0.750 INCHES NOMINAL
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
(AHLV) 0.750 INCHES NOMINAL
SECOND LEG END WIDTH
(AHLH) 9.750 INCHES NOMINAL
SECOND LEG HOLE ARRANGEMENT STYLE
(AKCU) 2 SLOTS
SECOND LEG SLOT WIDTH
(AHMA) 0.438 INCHES NOMINAL
SECOND LEG STYLE
(AKBU) CHAMFERED ENDS
SECOND LEG THICKNESS
(AHPX) 0.125 INCHES NOMINAL
SECOND LEG WIDTH
(AHLF) 10.130 INCHES NOMINAL
SPECIAL FEATURES
(FEAT) BOTH BOTTOM CORNERS ARE CUT AT 45 DEGREE TO 0.380 IN.
STYLE DESIGNATOR
(STYL) DOUBLE ANGLE

Manufacturer Part Numbers


Related Inventory

12299627-5
2805011147432
Condition NS
COVER
Readily Available
12299627
2510 01 114 7512
SUPPORT,TANK CO
Request


 
Top