ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-01-134-5968, 5340011345968
HINGE,BUTT

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 011345968
Codification Country
United States
Item Name Code
INC 22894
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Request Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-01-134-5968
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-01-134-5968


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-01-134-5968

National Stock Number (NSN) 5340-01-134-5968, or NIIN 011345968, (hinge,butt) was assigned July 6, 1982 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There are no manufacturer part numbers associated to this NSN.

This part number has not been procured by the US Government in over 5 years.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Sep 02, 2005, this NSN's acquisition method was noted as: Suitable for Competitive Acquisition. (Potential sources shall include dealers/distributors.) The Government has unlimited rights to the technical data, and the data package is complete. Valid AMCs: 1 and 2.

This NSN is assigned to Item Name Code (INC) 22894. [A HINGE USUALLY WITH RECTANGULARLY SHAPED LEAVES. THE DIMENSION PARALLEL TO THE HINGE PIN MUST BE GREATER THAN THE DIMENSION TRANSVERSE TO THE HINGE PIN. IT MAY HAVE A TENSION COIL SPRING AT ITS PIVOT(S) FOR CLOSING ACTION, AND MAY HAVE A THIRD MEMBER BETWEEN ITS PIVOT(S) TO PERMIT THE DOOR, OR THE LIKE, TO SWING IN AN ARC FROM EITHER SIDE.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340011345968 does not contain precious metals.

This information was last updated on .


Technical Characteristics

UNABLE TO DECODE
(ANNQ) UNABLE TO DECODE
MATERIAL AND LOCATION
(ANNQ) ALUMINUM ALLOY, QQ-A-250/8, ALLOY 5052, H34 BODY
UNABLE TO DECODE
(ANNR) UNABLE TO DECODE
SURFACE TREATMENT AND LOCATION
(ANNR) PASSIVATED,QQ-P-35,PIN
BODY WIDTH
(ADAT) 6.218 INCHES NOMINAL
DEVELOPED DISTANCE FROM PIN CENTER TO OFFSET JAMB LEAF EDGE
(AKFT) 0.396 INCHES MINIMUM AND 0.406 INCHES MAXIMUM
JAMB LEAF OFFSET DISTANCE
(AKFQ) 0.187 INCHES NOMINAL
KNUCKLE TYPE
(AKNB) FRICTION
KNUCKLE QUANTITY
(AKEX) 9
MATERIAL THICKNESS
(ABPX) 0.051 INCHES NOMINAL
MATERIAL
(MATT) ALUMINUM ALLOY 5052 OR ALUMINUM ALLOY BODY
MATERIAL
(MATT) STEEL COMP 303 PIN
MOUNTING HOLE DIAMETER
(ABTB) 0.138 INCHES MINIMUM AND 0.143 INCHES MAXIMUM
MOUNTING HOLE QUANTITY
(ABTJ) 5
PERFORMANCE TYPE
(AGLD) NOT RATED
PIN REMOVABILITY
(AKES) NONREMOVABLE
REVERSIBLE FEATURE
(AJNC) NOT INCLUDED
SPECIAL FEATURES
(FEAT) HING MUST FOLD BACK ON SELF; TWO HOLES 0.275 IN. MIN
STYLE DESIGNATOR
(STYL) BUTT W/JAMB LEAF OFFSET
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
(STDC) QQ-P-35 MIL SPEC SINGLE TREATMENT RESPONSE PIN
SURFACE TREATMENT
(SFTT) PASSIVATE PIN
MATERIAL AND LOCATION
(ANNQ) CRES,ASTM A582,TYPE 303,PIN

Manufacturer Part Numbers


Related Inventory



 
Top