ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-01-135-5329, 5340011355329
CATCH,CLAMPING

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 011355329
Codification Country
United States
Item Name Code
INC 26525
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Request Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-01-135-5329
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-01-135-5329


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-01-135-5329

National Stock Number (NSN) 5340-01-135-5329, or NIIN 011355329, (catch,clamping) was assigned July 27, 1982 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 2 suppliers. Today, 2 suppliers are listed as Active suppliers for this NSN. Of the active suppliers, 2 suppliers are deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Aug 02, 2005, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The Government physically does not have in its possession sufficient, accurate, or legible data to purchase this part from other than current source(s). (NOTE: This code is applicable only to parts under immediate buy requirements and only as long as the deficiency is under review for resolution and appropriate recoding.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 26525. [A POSITIVE FASTENING DEVICE CONSISTING OF A MOUNTABLE BASE WITH AN EXTENDED LOOP, CLAW, OR THE LIKE. IT MAY INCLUDE A CATCH STRIKE AND MOUNTING HARDWARE FOR ITS COMPLETE INSTALLATION ON FLAT SURFACES. THE LOOP, CLAW, OR THE LIKE CAN BE MANUALLY ENGAGED OR DISENGAGED READILY FOR THE PURPOSE OF SECURING THE MATING SECTIONS OF A SUITCASE, LOCKER-TRUNK, SHIPPING AND STORAGE CONTAINER, PREFABRICATED BUILDING, TOOL CHEST OR THE LIKE. EXCLUDES:CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; AND LATCH OR LOCK (AS MODIFIED).]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340011355329 does not contain precious metals.

This information was last updated on .


Technical Characteristics

OVERALL LENGTH
(ABXG) 2.595 INCHES MINIMUM AND 2.610 INCHES MAXIMUM
OVERALL HEIGHT
(CTHX) 0.660 INCHES NOMINAL
UNABLE TO DECODE
(CTHX) UNABLE TO DECODE
DESIGN TYPE
(APGF) CLAW ENGAGING
ENGAGING SURFACE WIDTH
(CJMH) 0.690 INCHES NOMINAL
HOLE QUANTITY
(ASXK) 2
OPERATION METHOD
(APHE) WING NUT
OVERALL HEIGHT
(ABKW) 0.660 INCHES NOMINAL
OVERALL LENGTH
(ABHP) 2.595 INCHES MINIMUM AND 2.610 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) AISI ASSN STD SINGLE MATERIAL RESPONSE HOUSING
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) AISI ASSN STD SINGLE MATERIAL RESPONSE STRIKE
MATERIAL
(MATT) STEEL COMP 1020 HOUSING
MATERIAL
(MATT) STEEL COMP 1020 OVERALL
MATERIAL
(MATT) STEEL COMP 4130 STRIKE
MATERIAL
(MATT) STEEL CORROSION RESISTING OR STEEL SPRING
WING NUT WIDTH
(CJMN) 1.370 INCHES MINIMUM AND 1.390 INCHES MAXIMUM
SPECIFICATION/STANDARD DATA
(ZZZK) 26512-GL510AD MANUFACTURERS SPECIFICATION
STYLE DESIGNATOR
(STYL) SPECIAL
UNABLE TO DECODE
(ABXG) UNABLE TO DECODE AND UNABLE TO DECODE

Manufacturer Part Numbers


Related Inventory



 
Top