ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-01-157-7439, 5340011577439
BRACKET,DOUBLE ANGLE

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 011577439
Codification Country
United States
Item Name Code
INC 20354
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Request Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-01-157-7439
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-01-157-7439


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-01-157-7439

National Stock Number (NSN) 5340-01-157-7439, or NIIN 011577439, (bracket,double angle) was assigned July 11, 1983 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 2 suppliers. Today, there are no suppliers listed as an Active supplier for this NSN. Of the active suppliers, there are no suppliers that are deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Sep 02, 2005, this NSN's acquisition method was noted as: Suitable for Competitive Acquisition. (Potential sources shall include dealers/distributors.) This part requires engineering source approval by the design control activity in order to maintain the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 20354. [A RIGID ITEM USUALLY FABRICATED FROM FLAT MATERIAL, FORMING TWO ALTERNATE OR TWO ADJACENT INTERIOR ANGLES, BOTH WHICH MAY BE LESS THAN 180 DEGREES (3.141 RADIANS). IT IS DESIGNED TO POSITION, ALIGN, AND/OR SUPPORT AN ITEM. IT MAY BE REINFORCED. SEE ALSO BRACKET, ANGLE AND BRACKET (1), MOUNTING.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340011577439 does not contain precious metals.

This information was last updated on .


Technical Characteristics

CENTER SECTION HEIGHT
(AHPZ) 0.219 INCHES NOMINAL
CENTER SECTION THICKNESS
(AHQB) 0.042 INCHES NOMINAL
CENTER SECTION WIDTH
(AHQA) 1.001 INCHES NOMINAL
FIRST LEG STYLE
(AJZU) SQUARE
FIRST LEG THICKNESS
(AHPW) 0.042 INCHES NOMINAL
FIRST LEG HOLE ARRANGEMENT STYLE
(AKAU) NO HOLE
FIRST LEG LENGTH
(ADLK) 0.344 INCHES NOMINAL
FIRST LEG WIDTH
(AHQN) 1.001 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) QQ-S-766,TEMPER 1-4 HARD FED SPEC SINGLE MATERIAL RESPONSE
MATERIAL
(MATT) STEEL COMP 301 OR STEEL COMP 302
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH
(AHLP) 0.625 INCHES NOMINAL
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
(AHLW) 0.188 INCHES NOMINAL
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
(AHLV) 0.172 INCHES MINIMUM AND 0.188 INCHES MAXIMUM
SECOND LEG CORNER RADIUS
(AHLG) 0.188 INCHES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEG
(CSSP) NOT IDENTICAL
SECOND LEG HOLE ARRANGEMENT STYLE
(AKCU) TWO HOLES
SECOND LEG HOLE DIAMETER
(AHLN) 0.124 INCHES MINIMUM AND 0.129 INCHES MAXIMUM
SECOND LEG LENGTH
(ADLL) 0.438 INCHES NOMINAL
SECOND LEG STYLE
(AKBU) CORNER RADIUS
SECOND LEG THICKNESS
(AHPX) 0.042 INCHES NOMINAL
SECOND LEG WIDTH
(AHLF) 1.001 INCHES NOMINAL
STYLE DESIGNATOR
(STYL) DOUBLE ANGLE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
(STDC) CAP-177 FSCM 11871 MFR REF SINGLE TREATMENT RESPONSE
SURFACE TREATMENT
(SFTT) PASSIVATE

Manufacturer Part Numbers


Related Inventory



 
Top