ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-01-159-9500, 5340011599500
RETAINER,HELICAL COMPRESSION SPR

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 011599500
Codification Country
United States
Item Name Code
INC 24327
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-01-159-9500
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-01-159-9500


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-01-159-9500

National Stock Number (NSN) 5340-01-159-9500, or NIIN 011599500, (retainer,helical compression spr) was assigned August 15, 1983 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There are 2 manufacturer part numbers associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 3 suppliers. Today, 3 suppliers are listed as Active suppliers for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years, with the most recent procurement date of Jan 30, 2018. There has been one contract issued for this part number, with one award given. The US Government has only awarded those contracts to one supplier. The last contract numbers awarded were: SPE4A518F142C. The total value of the awarded contracts has been US$ 1,000.00.

This NSN is somewhat common among different platforms, belonging to 3 different weapons systems.

There has been very little demand for this national stock number. The demand for this NSN originated from less than 5 countries. Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Nov 14, 2017, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The data needed to produce this item from additional sources is not physically available. Valid AMCs: 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 24327. [A CYLINDRICAL ITEM SPECIFICALLY DESIGNED TO FIT OVER THE END OF AND COMPLETELY ENCASE THE SPRING. THE OPEN END IS USUALLY FLANGED; THE OPPOSITE END MAY BE CLOSED OR HAVE AN ORIFICE TO ACCOMMODATE A GUIDE, PLUNGER, OR THE LIKE. IT IS USED TO POSITION THE SPRING AND RESTRAIN LATERAL MOTION. IT MAY PROVIDE A SEAT FOR THE SPRING. EXCLUDES:HOLDER,SPRING.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340011599500 does not contain precious metals.

This information was last updated on .


Technical Characteristics

BODY INSIDE DIAMETER
(ADAS) INCHES MINIMUM 0.445 AND INCHES MAXIMUM 0.455
BODY OUTSIDE DIAMETER
(ADAR) INCHES MINIMUM 0.540 AND INCHES MAXIMUM 0.550
CASEHARDENING INDICATOR
(AASG) NOT CASE-HARDENED
FLANGE DIAMETER
(ABKK) INCHES MINIMUM 1.305 AND INCHES MAXIMUM 1.315
FLANGE THICKNESS
(ABKU) INCHES MINIMUM 0.035 AND INCHES MAXIMUM 0.045
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) FED SPEC 1ST MATERIAL RESPONSE QQ-A-200 TO 8, 6061, T6 AND FED SPEC 2ND MATERIAL RESPONSE QQ-A-200 TO 8, 6061, T651 AND FED SPEC 3RD MATERIAL RESPONSE QQ-A-225 TO 8, ALLOY 6061, T6 AND FED SPEC 4TH MATERIAL RESPONSE QQ-A-225 TO 8, ALLOY 6061, T651 AND FED SPEC 5TH MATERIAL RESPONSE QQ-A-250 TO 11, ALLOY 6061, T6 AND FED SPEC ALL MATERIAL RESPONSES QQ-A-250 TO 11, T651
MATERIAL
(MATT) ALUMINUM ALLOY 6061 OR ALUMINUM ALLOY 6061 OR ALUMINUM ALLOY 6061 OR ALUMINUM ALLOY 6061 OR ALUMINUM ALLOY 6061 OR ALUMINUM ALLOY 6061
OVERALL HEIGHT
(ABKW) INCHES NOMINAL 0.165
PROPRIETARY CHARACTERISTICS
(PRPY) PACS
SPECIAL FEATURES
(FEAT) FLANGE ROLLED OVER 90.0 DEG TO FORM A CUP SHAPE 0.145 IN. MIN 0. 155 IN. MAX DP
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
(STDC) MFR REF SINGLE TREATMENT RESPONSE S13208,CAGE 76301
SURFACE TREATMENT
(SFTT) ANODIZE

Manufacturer Part Numbers


Related Inventory

G910112821
BDWG-GAMECHANGER
Condition NE
GAMECHANGERS, L
Readily Available


 
Top