ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-01-162-8648, 5340011628648
BRACKET,DOUBLE ANGLE

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 011628648
Codification Country
United States
Item Name Code
INC 20354
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: We have 1 qualified suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-01-162-8648
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-01-162-8648


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-01-162-8648

National Stock Number (NSN) 5340-01-162-8648, or NIIN 011628648, (bracket,double angle) was assigned September 23, 1983 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. One of those part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 2 suppliers. Today, 2 suppliers are listed as Active suppliers for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Sep 30, 2011, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The data needed to produce this item from additional sources is not physically available. Valid AMCs: 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 20354. [A RIGID ITEM USUALLY FABRICATED FROM FLAT MATERIAL, FORMING TWO ALTERNATE OR TWO ADJACENT INTERIOR ANGLES, BOTH WHICH MAY BE LESS THAN 180 DEGREES (3.141 RADIANS). IT IS DESIGNED TO POSITION, ALIGN, AND/OR SUPPORT AN ITEM. IT MAY BE REINFORCED. SEE ALSO BRACKET, ANGLE AND BRACKET (1), MOUNTING.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340011628648 does not contain precious metals.

This information was last updated on .


Technical Characteristics

CENTER SECTION HEIGHT
(AHPZ) 4.500 INCHES NOMINAL
CENTER SECTION THICKNESS
(AHQB) 0.190 INCHES NOMINAL
CENTER SECTION WIDTH
(AHQA) 9.750 INCHES NOMINAL
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH
(AHQU) 8.000 INCHES NOMINAL
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
(AHRB) 0.750 INCHES NOMINAL
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
(AHRA) 0.750 INCHES NOMINAL
FIRST LEG ANGLE
(CSSQ) 90.0 DEGREES NOMINAL
FIRST LEG LENGTH
(ADLK) 1.750 INCHES NOMINAL
FIRST LEG STYLE
(AJZU) SQUARE
FIRST LEG HOLE ARRANGEMENT STYLE
(AKAU) TWO HOLES
FIRST LEG HOLE DIAMETER
(AHLK) 0.530 INCHES NOMINAL
FIRST LEG THICKNESS
(AHPW) 0.190 INCHES NOMINAL
FIRST LEG WIDTH
(AHQN) 9.750 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) SAE ASSN STD SINGLE MATERIAL RESPONSE
MATERIAL
(MATT) STEEL COMP 1020
MOUNTING HOLE TYPE
(ACHY) PLAIN
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH
(AHLP) 5.750 INCHES NOMINAL
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
(AHLW) 0.530 INCHES NOMINAL
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
(AHLV) 0.500 INCHES NOMINAL
SECOND LEG ANGLE
(CSSR) 90.0 DEGREES NOMINAL
SECOND LEG LENGTH
(ADLL) 6.370 INCHES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEG
(CSSP) NOT IDENTICAL
SECOND LEG HOLE DIAMETER
(AHLN) 0.410 INCHES NOMINAL
SECOND LEG STYLE
(AKBU) SQUARE
SECOND LEG THICKNESS
(AHPX) 0.190 INCHES NOMINAL
SECOND LEG WIDTH
(AHLF) 9.750 INCHES NOMINAL
SPECIAL FEATURES
(FEAT) SECOND LEG HAS TWO OTHER HOLES 0.340 IN. DIA

Manufacturer Part Numbers


Related Inventory

1342790C1

Condition NE
Case Constructi
Readily Available
G7950381
63134279001
Condition NE
Annular Cutter,
Readily Available
20YP49
63134279002
Condition NE
Annular Cutter:
Readily Available
20YN45
63134279001
Condition NE
Annular Cutter:
Readily Available
1342790
5340011628648
Condition NS
BRACKET
Readily Available


 
Top