ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-01-168-1848, 5340011681848
BRACKET,DOUBLE ANGLE

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 011681848
Codification Country
United States
Item Name Code
INC 20354
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Request Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-01-168-1848
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-01-168-1848


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-01-168-1848

National Stock Number (NSN) 5340-01-168-1848, or NIIN 011681848, (bracket,double angle) was assigned December 14, 1983 in the Federal Logistics Information System (FLIS). This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by one supplier. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

This NSN is somewhat common among different platforms, belonging to 4 different weapons systems.

There has been very little demand for this national stock number. The demand for this NSN originated from less than 5 countries. Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Aug 02, 2005, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The Government physically does not have in its possession sufficient, accurate, or legible data to purchase this part from other than current source(s). (NOTE: This code is applicable only to parts under immediate buy requirements and only as long as the deficiency is under review for resolution and appropriate recoding.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 20354. [A RIGID ITEM USUALLY FABRICATED FROM FLAT MATERIAL, FORMING TWO ALTERNATE OR TWO ADJACENT INTERIOR ANGLES, BOTH WHICH MAY BE LESS THAN 180 DEGREES (3.141 RADIANS). IT IS DESIGNED TO POSITION, ALIGN, AND/OR SUPPORT AN ITEM. IT MAY BE REINFORCED. SEE ALSO BRACKET, ANGLE AND BRACKET (1), MOUNTING.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340011681848 does not contain precious metals.

This information was last updated on .


Technical Characteristics

FIRST LEG HOLE DIAMETER
(AHLK) 0.098 INCHES NOMINAL
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH
(AHQX) 0.400 INCHES NOMINAL
FIRST LEG STYLE
(AJZU) SQUARE
SECOND LEG RELATIONSHIP TO FIRST LEG
(CSSP) IDENTICAL
SECOND LEG LENGTH
(ADLL) 1.110 INCHES NOMINAL
FIRST LEG ANGLE
(CSSQ) 90.0 DEGREES NOMINAL
FIRST LEG WIDTH
(AHQN) 0.650 INCHES NOMINAL
CENTER SECTION THICKNESS
(AHQB) 0.050 INCHES NOMINAL
FIRST LEG LENGTH
(ADLK) 0.990 INCHES NOMINAL
FIRST LEG THICKNESS
(AHPW) 0.050 INCHES NOMINAL
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
(AHRA) 0.320 INCHES NOMINAL
FIRST LEG HOLE ARRANGEMENT STYLE
(AKAU) TWO HOLES
SECOND LEG ANGLE
(CSSR) 90.0 DEGREES NOMINAL
SECOND LEG THICKNESS
(AHPX) 0.050 INCHES NOMINAL
CENTER SECTION WIDTH
(AHQA) 0.650 INCHES NOMINAL
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
(AHRB) 0.200 INCHES NOMINAL
MATERIAL
(MATT) ALUMINUM ALLOY 7075
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) QQ-A-250/13 FED SPEC SINGLE MATERIAL RESPONSE
STYLE DESIGNATOR
(STYL) DOUBLE ANGLE
MOUNTING HOLE TYPE
(ACHY) PLAIN
CENTER SECTION HEIGHT
(AHPZ) 0.800 INCHES NOMINAL

Manufacturer Part Numbers


Related Inventory



 
Top