ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-01-182-7719, 5340011827719
BRACKET,DOUBLE ANGLE

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 011827719
Codification Country
United States
Item Name Code
INC 20354
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Request Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-01-182-7719
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-01-182-7719


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-01-182-7719

National Stock Number (NSN) 5340-01-182-7719, or NIIN 011827719, (bracket,double angle) was assigned June 27, 1984 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by one supplier. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

This NSN is somewhat common among different platforms, belonging to 3 different weapons systems.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Sep 02, 2005, this NSN's acquisition method was noted as: Suitable for Competitive Acquisition. (Potential sources shall include dealers/distributors.) The Government has unlimited rights to the technical data, and the data package is complete. Valid AMCs: 1 and 2.

This NSN is assigned to Item Name Code (INC) 20354. [A RIGID ITEM USUALLY FABRICATED FROM FLAT MATERIAL, FORMING TWO ALTERNATE OR TWO ADJACENT INTERIOR ANGLES, BOTH WHICH MAY BE LESS THAN 180 DEGREES (3.141 RADIANS). IT IS DESIGNED TO POSITION, ALIGN, AND/OR SUPPORT AN ITEM. IT MAY BE REINFORCED. SEE ALSO BRACKET, ANGLE AND BRACKET (1), MOUNTING.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340011827719 does not contain precious metals.

This information was last updated on .


Technical Characteristics

CENTER SECTION HEIGHT
(AHPZ) 1.020 INCHES NOMINAL
CENTER SECTION THICKNESS
(AHQB) 0.040 INCHES NOMINAL
CENTER SECTION WIDTH
(AHQA) 0.500 INCHES NOMINAL
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
(AHRA) 0.250 INCHES NOMINAL
FIRST LEG HOLE ARRANGEMENT STYLE
(AKAU) ONE HOLE
FIRST LEG HOLE DIAMETER
(AHLK) 0.154 INCHES MINIMUM AND 0.161 INCHES MAXIMUM
FIRST LEG ANGLE
(CSSQ) 90.0 DEGREES NOMINAL
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
(AHRB) 0.160 INCHES NOMINAL
FIRST LEG STYLE
(AJZU) SQUARE
FIRST LEG THICKNESS
(AHPW) 0.040 INCHES NOMINAL
FIRST LEG WIDTH
(AHQN) 0.500 INCHES NOMINAL
FIRST LEG LENGTH
(ADLK) 0.380 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) QQ-S-766 COND A FED SPEC SINGLE MATERIAL RESPONSE
MATERIAL
(MATT) STEEL COMP 302
MOUNTING HOLE TYPE
(ACHY) PLAIN
SECOND LEG ANGLE
(CSSR) 90.0 DEGREES NOMINAL
SECOND LEG LENGTH
(ADLL) 2.380 INCHES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEG
(CSSP) NOT IDENTICAL
SECOND LEG STYLE
(AKBU) SQUARE
SECOND LEG THICKNESS
(AHPX) 0.040 INCHES NOMINAL
SECOND LEG HOLE ARRANGEMENT STYLE
(AKCU) NO HOLE
SECOND LEG WIDTH
(AHLF) 0.500 INCHES NOMINAL
SPECIAL FEATURES
(FEAT) SECOND LEG EXTENDED DOWNWARD 0.380 IN. WITH ONE HOLE 0.156 IN. NOMINAL DIA
STYLE DESIGNATOR
(STYL) DOUBLE ANGLE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
(STDC) QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
SURFACE TREATMENT
(SFTT) PASSIVATE

Manufacturer Part Numbers


Related Inventory



 
Top