ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-01-196-6764, 5340011966764
BRACKET,DOUBLE ANGLE

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 011966764
Codification Country
United States
Item Name Code
INC 20354
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Request Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-01-196-6764
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-01-196-6764


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-01-196-6764

National Stock Number (NSN) 5340-01-196-6764, or NIIN 011966764, (bracket,double angle) was assigned December 13, 1984 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 2 suppliers. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

This NSN is unique to one weapons system.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Apr 26, 2008, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The annual buy value of this part falls below the screening threshold of $10,000 but it has been screened for known source(s). (NOTE: This code shall not be used when screening parts entering the inventory. It shall not be assigned in preference to or supersede any other AMSC.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 20354. [A RIGID ITEM USUALLY FABRICATED FROM FLAT MATERIAL, FORMING TWO ALTERNATE OR TWO ADJACENT INTERIOR ANGLES, BOTH WHICH MAY BE LESS THAN 180 DEGREES (3.141 RADIANS). IT IS DESIGNED TO POSITION, ALIGN, AND/OR SUPPORT AN ITEM. IT MAY BE REINFORCED. SEE ALSO BRACKET, ANGLE AND BRACKET (1), MOUNTING.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340011966764 does not contain precious metals.

This information was last updated on .


Technical Characteristics

CENTER SECTION WIDTH
(AHQA) 1066.8 MILLIMETERS NOMINAL
CENTER SECTION HEIGHT
(AHPZ) 76.0 MILLIMETERS MINIMUM AND 77.0 MILLIMETERS MAXIMUM
CENTER SECTION THICKNESS
(AHQB) 6.0 MILLIMETERS MINIMUM AND 7.0 MILLIMETERS MAXIMUM
FIRST LEG ANGLE
(CSSQ) 90.0 DEGREES NOMINAL
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
(AHRB) 19.0 MILLIMETERS NOMINAL
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
(AHRA) 533.4 MILLIMETERS NOMINAL
FIRST LEG HOLE ARRANGEMENT STYLE
(AKAU) ONE SLOT
FIRST LEG LENGTH
(ADLK) 44.5 MILLIMETERS NOMINAL
FIRST LEG SLOT LENGTH
(AHLL) 22.5 MILLIMETERS NOMINAL
FIRST LEG SLOT WIDTH
(AHLM) 11.0 MILLIMETERS NOMINAL
FIRST LEG STYLE
(AJZU) SQUARE
FIRST LEG THICKNESS
(AHPW) 6.0 MILLIMETERS MINIMUM AND 7.0 MILLIMETERS MAXIMUM
FIRST LEG WIDTH
(AHQN) 1066.8 MILLIMETERS NOMINAL
MOUNTING HOLE TYPE
(ACHY) PLAIN
SECOND LEG END WIDTH
(AHLH) 214.4 MILLIMETERS NOMINAL
SECOND LEG ANGLE
(CSSR) 90.0 DEGREES NOMINAL
SECOND LEG LENGTH
(ADLL) 350.5 MILLIMETERS MINIMUM AND 351.5 MILLIMETERS MAXIMUM
SECOND LEG RELATIONSHIP TO FIRST LEG
(CSSP) NOT IDENTICAL
SECOND LEG STYLE
(AKBU) SQUARE AND TAPERED
SECOND LEG THICKNESS
(AHPX) 6.0 MILLIMETERS MINIMUM AND 7.0 MILLIMETERS MAXIMUM
SECOND LEG WIDTH
(AHLF) 1066.8 MILLIMETERS NOMINAL
SPECIAL FEATURES
(FEAT) FIRST LEG HAS A 178.0 MM LG BY 25.0 MM W NOTCH; SECOND LEG HAS NINE 11.0 MM BY 22.5 MM SLOTS AND SIX 14.5 MM DIA HOLES; CENTER SECTION HAS TWO 14.5 MM DIA HOLES
STYLE DESIGNATOR
(STYL) DOUBLE ANGLE

Manufacturer Part Numbers


Related Inventory



 
Top