ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-01-239-5953, 5340012395953
BRACKET,DOUBLE ANGLE

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 012395953
Codification Country
United States
Item Name Code
INC 20354
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Request Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-01-239-5953
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-01-239-5953


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-01-239-5953

National Stock Number (NSN) 5340-01-239-5953, or NIIN 012395953, (bracket,double angle) was assigned September 1, 1986 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. One of those part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 3 suppliers. Today, 3 suppliers are listed as Active suppliers for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Jun 02, 2005, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The Government physically does not have in its possession sufficient, accurate, or legible data to purchase this part from other than current source(s). (NOTE: This code is applicable only to parts under immediate buy requirements and only as long as the deficiency is under review for resolution and appropriate recoding.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 20354. [A RIGID ITEM USUALLY FABRICATED FROM FLAT MATERIAL, FORMING TWO ALTERNATE OR TWO ADJACENT INTERIOR ANGLES, BOTH WHICH MAY BE LESS THAN 180 DEGREES (3.141 RADIANS). IT IS DESIGNED TO POSITION, ALIGN, AND/OR SUPPORT AN ITEM. IT MAY BE REINFORCED. SEE ALSO BRACKET, ANGLE AND BRACKET (1), MOUNTING.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340012395953 does not contain precious metals.

This information was last updated on .


Technical Characteristics

CENTER SECTION THICKNESS
(AHQB) 0.040 INCHES NOMINAL
FIRST LEG ANGLE
(CSSQ) 90.0 DEGREES NOMINAL
FIRST LEG STYLE
(AJZU) CORNER RADIUS
FIRST LEG THICKNESS
(AHPW) 0.040 INCHES NOMINAL
FIRST LEG HOLE ARRANGEMENT STYLE
(AKAU) TWO HOLES
FIRST LEG HOLE DIAMETER
(AHLK) 0.190 INCHES MINIMUM AND 0.196 INCHES MAXIMUM
FIRST LEG LENGTH
(ADLK) 0.750 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) MIL-S-18729 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIAL
(MATT) STEEL COMP 4130
MOUNTING HOLE TYPE
(ACHY) PLAIN
SECOND LEG ANGLE
(CSSR) 90.0 DEGREES NOMINAL
SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH
(AHLT) 1.375 INCHES NOMINAL
SECOND LEG LENGTH
(ADLL) 0.750 INCHES NOMINAL
SECOND LEG HOLE ARRANGEMENT STYLE
(AKCU) THREE HOLES
SECOND LEG HOLE DIAMETER
(AHLN) 0.257 INCHES MINIMUM AND 0.262 INCHES MAXIMUM
SECOND LEG RELATIONSHIP TO FIRST LEG
(CSSP) NOT IDENTICAL
SECOND LEG STYLE
(AKBU) CORNER RADIUS
SECOND LEG THICKNESS
(AHPX) 0.040 INCHES NOMINAL
SPECIAL FEATURES
(FEAT) COLOR WHITE
STYLE DESIGNATOR
(STYL) DOUBLE ANGLE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
(STDC) G+110AW09,CAGEC 26512 MFR REF SINGLE TREATMENT RESPONSE
SURFACE TREATMENT
(SFTT) ENAMEL

Manufacturer Part Numbers


Related Inventory



 
Top