ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-01-243-9939, 5340012439939
BRACKET,DOUBLE ANGLE

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 012439939
Codification Country
United States
Item Name Code
INC 20354
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Request Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-01-243-9939
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-01-243-9939


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-01-243-9939

National Stock Number (NSN) 5340-01-243-9939, or NIIN 012439939, (bracket,double angle) was assigned November 5, 1986 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by one supplier. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

This NSN is somewhat common among different platforms, belonging to 3 different weapons systems.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Apr 12, 2013, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The data or the rights to use the data needed to purchase this part from additional sources are not owned by the Government and it has been determined that it is uneconomical to purchase them. Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 20354. [A RIGID ITEM USUALLY FABRICATED FROM FLAT MATERIAL, FORMING TWO ALTERNATE OR TWO ADJACENT INTERIOR ANGLES, BOTH WHICH MAY BE LESS THAN 180 DEGREES (3.141 RADIANS). IT IS DESIGNED TO POSITION, ALIGN, AND/OR SUPPORT AN ITEM. IT MAY BE REINFORCED. SEE ALSO BRACKET, ANGLE AND BRACKET (1), MOUNTING.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340012439939 does not contain precious metals.

This information was last updated on .


Technical Characteristics

CENTER SECTION HEIGHT
(AHPZ) 0.560 INCHES NOMINAL
CENTER SECTION THICKNESS
(AHQB) 0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM
FEATURES PROVIDED
(CBBL) NUT
FIRST LEG HOLE ARRANGEMENT STYLE
(AKAU) NO HOLE
FIRST LEG ANGLE
(CSSQ) 45.0 DEGREES NOMINAL
FIRST LEG CORNER RADIUS
(AHQP) 0.120 INCHES NOMINAL
FIRST LEG STYLE
(AJZU) CORNER RADIUS
FIRST LEG THICKNESS
(AHPW) 0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM
FIRST LEG WIDTH
(AHQN) 1.250 INCHES NOMINAL
FIRST LEG LENGTH
(ADLK) 0.620 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) QQ-A-250/5,TEMPER O FED SPEC SINGLE MATERIAL RESPONSE
MATERIAL
(MATT) ALUMINUM ALLOY 2024
MOUNTING HOLE TYPE
(ACHY) PLAIN
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
(AHLW) 0.310 INCHES NOMINAL
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
(AHLV) 0.380 INCHES NOMINAL
SECOND LEG ANGLE
(CSSR) 45.0 DEGREES NOMINAL
SECOND LEG CORNER RADIUS
(AHLG) 0.310 INCHES NOMINAL
SECOND LEG LENGTH
(ADLL) 0.780 INCHES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEG
(CSSP) NOT IDENTICAL
SECOND LEG HOLE ARRANGEMENT STYLE
(AKCU) ONE HOLE
SECOND LEG HOLE DIAMETER
(AHLN) 0.197 INCHES MINIMUM AND 0.202 INCHES MAXIMUM
SECOND LEG STYLE
(AKBU) CORNER RADIUS
SECOND LEG THICKNESS
(AHPX) 0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM
SECOND LEG WIDTH
(AHLF) 1.250 INCHES NOMINAL
STYLE DESIGNATOR
(STYL) ADJACENT ANGLES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
(STDC) MIL-P-23377 MIL SPEC SINGLE TREATMENT RESPONSE
SURFACE TREATMENT
(SFTT) PRIMER EPOXY AND PLASTIC EPOXY

Manufacturer Part Numbers


Related Inventory



 
Top