ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-01-251-4144, 5340012514144
CLAMP,BLOCK

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 012514144
Codification Country
United States
Item Name Code
INC 37415
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Request Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-01-251-4144
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-01-251-4144


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-01-251-4144

National Stock Number (NSN) 5340-01-251-4144, or NIIN 012514144, (clamp,block) was assigned March 19, 1987 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. One of those part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 2 suppliers. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, there are no suppliers that are deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

This NSN is somewhat common among different platforms, belonging to 2 different weapons systems.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Apr 12, 2013, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The data or the rights to use the data needed to purchase this part from additional sources are not owned by the Government and it has been determined that it is uneconomical to purchase them. Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 37415. [A SQUARE OR RECTANGULAR MULTIPIECE ITEM DESIGNED TO BE ATTACHED TO ANOTHER OBJECT OR STRUCTURE. IT MUST HAVE ONE OR MORE HOLES DESIGNED TO SURROUND AND SECURELY GRIP ITEMS SUCH AS ELECTRICAL CABLES, CONDUITS, PIPES, TUBES AND/OR HOSES. IT MAY HAVE ONE OR MORE HOLES DESIGNED TO PREVENT SNAGGING OR CHAFING AND PROVIDE SUPPORT AND/OR GUIDANCE TO MOVING CABLE PASSING THROUGH IT. IT MAY HAVE AN INTEGRAL CLAMPING FEATURE. FOR ITEMS SPECIFICALLY DESIGNED TO SERVE AS A GUIDE, SEE FAIRLEAD, BLOCK AND FAIRLEAD SECTION, BLOCK. EXCLUDES:BRACKET, PIPE.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340012514144 does not contain precious metals.

This information was last updated on .


Technical Characteristics

DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH
(AFEC) 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM
DISTANCE FROM END TO FIRST MOUNTING HOLE CENTER
(CWXC) 1.280 INCHES MINIMUM AND 1.380 INCHES MAXIMUM
BLOCK HEIGHT
(BYGG) 0.670 INCHES MINIMUM AND 0.770 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD MOUNTING HOLES
(AXPE) 1.500 INCHES NOMINAL
CLAMPING HOLE DIAMETER
(CWWM) 0.834 INCHES MINIMUM ALL HOLES AND 0.854 INCHES MAXIMUM ALL HOLES
CLAMPING HOLE QUANTITY
(CWTD) 2
OVERALL HEIGHT
(ABKW) 1.400 INCHES MINIMUM AND 1.500 INCHES MAXIMUM
OVERALL LENGTH
(ABHP) 2.430 INCHES MINIMUM AND 2.470 INCHES MAXIMUM
OVERALL WIDTH
(ABMK) 0.900 INCHES MINIMUM AND 1.150 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) QQ-A-250/2 FED SPEC SINGLE MATERIAL RESPONSE
MATERIAL
(MATT) ALUMINUM
MOUNTING FACILITY
(AZGM) UNTHREADED HOLE
MOUNTING HOLE DIAMETER
(ABTB) 0.334 INCHES MINIMUM AND 0.354 INCHES MAXIMUM
MOUNTING HOLE QUANTITY
(ABTJ) 1
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
(STDC) MIL-A-8625,TYPE 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE
SURFACE TREATMENT
(SFTT) ANODIZE

Manufacturer Part Numbers


Related Inventory



 
Top