ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-01-259-0502, 5340012590502
CLAMP,BLOCK

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 012590502
Codification Country
United States
Item Name Code
INC 37415
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Request Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-01-259-0502
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-01-259-0502


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-01-259-0502

National Stock Number (NSN) 5340-01-259-0502, or NIIN 012590502, (clamp,block) was assigned July 11, 1987 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There are 2 manufacturer part numbers associated with this NSN. 2 of those part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 3 suppliers. Today, 2 suppliers are listed as Active suppliers for this NSN. Of the active suppliers, there are no suppliers that are deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

This NSN is somewhat common among different platforms, belonging to 2 different weapons systems.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Apr 12, 2013, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The data or the rights to use the data needed to purchase this part from additional sources are not owned by the Government and it has been determined that it is uneconomical to purchase them. Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 37415. [A SQUARE OR RECTANGULAR MULTIPIECE ITEM DESIGNED TO BE ATTACHED TO ANOTHER OBJECT OR STRUCTURE. IT MUST HAVE ONE OR MORE HOLES DESIGNED TO SURROUND AND SECURELY GRIP ITEMS SUCH AS ELECTRICAL CABLES, CONDUITS, PIPES, TUBES AND/OR HOSES. IT MAY HAVE ONE OR MORE HOLES DESIGNED TO PREVENT SNAGGING OR CHAFING AND PROVIDE SUPPORT AND/OR GUIDANCE TO MOVING CABLE PASSING THROUGH IT. IT MAY HAVE AN INTEGRAL CLAMPING FEATURE. FOR ITEMS SPECIFICALLY DESIGNED TO SERVE AS A GUIDE, SEE FAIRLEAD, BLOCK AND FAIRLEAD SECTION, BLOCK. EXCLUDES:BRACKET, PIPE.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340012590502 does not contain precious metals.

This information was last updated on .


Technical Characteristics

BLOCK HEIGHT
(BYGG) 0.670 INCHES MINIMUM AND 0.770 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND MOUNTING HOLES
(AXPC) 1.500 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SIXTH CLAMPING HOLES
(CWYS) 4.500 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD MOUNTING HOLES
(AXPE) 3.000 INCHES NOMINAL
CLAMPING HOLE QUANTITY
(CWTD) 4
DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH
(AFEC) 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM
DISTANCE FROM END TO FIRST MOUNTING HOLE CENTER
(CWXC) 1.280 INCHES MINIMUM AND 1.380 INCHES MAXIMUM
DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER
(CWXN) 0.580 INCHES MINIMUM AND 0.630 INCHES MAXIMUM
OVERALL HEIGHT
(ABKW) 0.915 INCHES MINIMUM AND 1.045 INCHES MAXIMUM
OVERALL LENGTH
(ABHP) 5.500 INCHES MINIMUM AND 5.780 INCHES MAXIMUM
OVERALL WIDTH
(ABMK) 1.400 INCHES MINIMUM AND 1.500 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) QQ-A-250/2 FED SPEC SINGLE MATERIAL RESPONSE
MATERIAL
(MATT) ALUMINUM
MOUNTING FACILITY
(AZGM) UNTHREADED HOLE
MOUNTING HOLE DIAMETER
(ABTB) 0.334 INCHES MINIMUM AND 0.354 INCHES MAXIMUM
MOUNTING HOLE QUANTITY
(ABTJ) 3
STYLE DESIGNATOR
(STYL) RECTANGULAR
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
(STDC) MIL-A-8625,TY2,CL1 MIL SPEC SINGLE TREATMENT RESPONSE
SURFACE TREATMENT
(SFTT) ANODIZE

Manufacturer Part Numbers


Related Inventory



 
Top