ISO Group Logo
Defense and Aerospace
Supply Chain Partner


×

Hurricane Irma is in our area.
Because of this shipping and response times may be affected. More info as we have it available.

NSN 5340-01-265-0601, 5340012650601
CLAMP,BLOCK

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 012650601
Codification Country
United States
Item Name Code
INC 37415
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-01-265-0601
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-01-265-0601


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-01-265-0601

National Stock Number (NSN) 5340-01-265-0601, or NIIN 012650601, (clamp,block) was assigned October 9, 1987 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There are 3 manufacturer part numbers associated with this NSN. One of those part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 2 suppliers. Today, 2 suppliers are listed as Active suppliers for this NSN. Of the active suppliers, 2 suppliers are deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over a year. There have been 2 contracts issued for this part number, with 2 awards given. There is minimal competition for this NSN. The US Government has awarded contracts to 2 different suppliers. The last contract numbers awarded were: SPE5EK15M1026, SPM5L110V2292. The total value of the awarded contracts has been US$ 525.15.

This NSN is somewhat common among different platforms, belonging to 2 different weapons systems.

There has been very little demand for this national stock number. The demand for this NSN originated from less than 5 countries. Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Dec 17, 2013, this NSN's acquisition method was noted as: Suitable for Competitive Acquisition. (Potential sources shall include dealers/distributors.) The annual buy value of this part falls below the screening threshold of $10,000 but it has been screened for known source(s). (NOTE: This code shall not be used when screening parts entering the inventory. It shall not be assigned in preference to or supersede any other AMSC.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 37415. [A SQUARE OR RECTANGULAR MULTIPIECE ITEM DESIGNED TO BE ATTACHED TO ANOTHER OBJECT OR STRUCTURE. IT MUST HAVE ONE OR MORE HOLES DESIGNED TO SURROUND AND SECURELY GRIP ITEMS SUCH AS ELECTRICAL CABLES, CONDUITS, PIPES, TUBES AND/OR HOSES. IT MAY HAVE ONE OR MORE HOLES DESIGNED TO PREVENT SNAGGING OR CHAFING AND PROVIDE SUPPORT AND/OR GUIDANCE TO MOVING CABLE PASSING THROUGH IT. IT MAY HAVE AN INTEGRAL CLAMPING FEATURE. FOR ITEMS SPECIFICALLY DESIGNED TO SERVE AS A GUIDE, SEE FAIRLEAD, BLOCK AND FAIRLEAD SECTION, BLOCK. EXCLUDES BRACKET, PIPE.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340012650601 does not contain precious metals.

This information was last updated on .


Technical Characteristics

DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER
(CWXN) 2.265 INCHES NOMINAL
DISTANCE FROM END TO FIRST MOUNTING HOLE CENTER
(CWXC) 0.500 INCHES NOMINAL
BLOCK HEIGHT
(BYGG) 1.700 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND MOUNTING HOLES
(AXPC) 3.530 INCHES NOMINAL
CLAMPING HOLE DIAMETER
(CWWM) 2.500 INCHES NOMINAL FIRST HOLE
CLAMPING HOLE QUANTITY
(CWTD) 1
OVERALL HEIGHT
(ABKW) 4.580 INCHES NOMINAL
OVERALL LENGTH
(ABHP) 5.900 INCHES NOMINAL
MATERIAL
(MATT) PLASTIC
MOUNTING FACILITY
(AZGM) UNTHREADED HOLE
MOUNTING HOLE QUANTITY
(ABTJ) 2
MOUNTING HOLE DIAMETER
(ABTB) 0.438 INCHES NOMINAL
SPECIAL FEATURES
(FEAT) PROVIDED WITH 1 WELDING PLATE,1 COVER PLATE AND 2 HEX HEAD BOLTS
STYLE DESIGNATOR
(STYL) RECTANGULAR

Manufacturer Part Numbers

1240217

ISC
5
RNCC
5
RNVC
2
6635SPP

ISC
5
RNCC
5
RNVC
9
60635PP

ISC
5
RNCC
3
RNVC
2

Related Inventory

GM1240217C
15995033
FENDER, FRONT,
Readily Available
GM1240217PP
15995033
FENDER, FRONT,
Readily Available
7101-24-02-17
5420121444177
SCHRAUBE
Readily Available
7101-24-02.17
5420121444177
SCHRAUBE
Readily Available


 
Top