ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-01-271-0385, 5340012710385
CLAMP,BLOCK

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 012710385
Codification Country
United States
Item Name Code
INC 37415
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Request Qualified Suppliers: We have 4 qualified suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-01-271-0385
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-01-271-0385


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-01-271-0385

National Stock Number (NSN) 5340-01-271-0385, or NIIN 012710385, (clamp,block) was assigned January 16, 1988 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There are no manufacturer part numbers associated to this NSN. ISO Group has several sources of supply for this NSN.

This part number has not been procured by the US Government in over 5 years, with the most recent procurement date of Dec 28, 2009. There has been one contract issued for this part number, with one award given. The US Government has only awarded those contracts to one supplier. The last contract numbers awarded were: SPM5L310V0724. The total value of the awarded contracts has been US$ 382.50.

There has been a small amount of demand for this national stock number. The demand for this NSN originated from less than 5 countries. Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Sep 02, 2005, this NSN's acquisition method was noted as: Suitable for Competitive Acquisition. (Potential sources shall include dealers/distributors.) The Government has unlimited rights to the technical data, and the data package is complete. Valid AMCs: 1 and 2.

This NSN is assigned to Item Name Code (INC) 37415. [A SQUARE OR RECTANGULAR MULTIPIECE ITEM DESIGNED TO BE ATTACHED TO ANOTHER OBJECT OR STRUCTURE. IT MUST HAVE ONE OR MORE HOLES DESIGNED TO SURROUND AND SECURELY GRIP ITEMS SUCH AS ELECTRICAL CABLES, CONDUITS, PIPES, TUBES AND/OR HOSES. IT MAY HAVE ONE OR MORE HOLES DESIGNED TO PREVENT SNAGGING OR CHAFING AND PROVIDE SUPPORT AND/OR GUIDANCE TO MOVING CABLE PASSING THROUGH IT. IT MAY HAVE AN INTEGRAL CLAMPING FEATURE. FOR ITEMS SPECIFICALLY DESIGNED TO SERVE AS A GUIDE, SEE FAIRLEAD, BLOCK AND FAIRLEAD SECTION, BLOCK. EXCLUDES:BRACKET, PIPE.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340012710385 does not contain precious metals.

This information was last updated on .


Technical Characteristics

DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH
(AFEC) 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM
DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER
(CWXN) 1.000 INCHES NOMINAL
DISTANCE FROM END TO FIRST MOUNTING HOLE CENTER
(CWXC) 0.370 INCHES NOMINAL
BLOCK HEIGHT
(BYGG) 0.735 INCHES MINIMUM AND 0.765 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN FIRST AND FIFTH CLAMPING HOLES
(CWYM) 3.130 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN FIRST AND FOURTH CLAMPING HOLES
(CWYH) 2.380 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND CLAMPING HOLES
(CWXZ) 0.500 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND MOUNTING HOLES
(AXPC) 6.240 INCHES MINIMUM AND 6.260 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SIXTH CLAMPING HOLES
(CWYS) 3.880 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD CLAMPING HOLES
(CWYC) 1.750 INCHES NOMINAL
CLAMPING HOLE DIAMETER
(CWWM) 0.250 INCHES MINIMUM FOURTH HOLE AND 0.256 INCHES MAXIMUM FOURTH HOLE
CLAMPING HOLE DIAMETER
(CWWM) 0.250 INCHES MINIMUM SIXTH HOLE AND 0.256 INCHES MAXIMUM SIXTH HOLE
CLAMPING HOLE DIAMETER
(CWWM) 0.250 INCHES MINIMUM THIRD HOLE AND 0.256 INCHES MAXIMUM THIRD HOLE
CLAMPING HOLE DIAMETER
(CWWM) 0.250 INCHES MINIMUM FIFTH HOLE AND 0.256 INCHES MAXIMUM FIFTH HOLE
CLAMPING HOLE DIAMETER
(CWWM) 0.500 INCHES MINIMUM FIRST HOLE AND 0.506 INCHES MAXIMUM FIRST HOLE
CLAMPING HOLE DIAMETER
(CWWM) 0.500 INCHES MINIMUM SECOND HOLE AND 0.506 INCHES MAXIMUM SECOND HOLE
CLAMPING HOLE QUANTITY
(CWTD) 11
OVERALL HEIGHT
(ABKW) 3.000 INCHES NOMINAL
OVERALL LENGTH
(ABHP) 7.000 INCHES NOMINAL
OVERALL WIDTH
(ABMK) 0.452 INCHES MINIMUM AND 0.548 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) MIL-P-15035,TY FBM MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-P-15035,TY FBI MIL SPEC SINGLE MATERIAL RESPONSE
MATERIAL
(MATT) PLASTIC
MOUNTING FACILITY
(AZGM) UNTHREADED HOLE
MOUNTING HOLE DIAMETER
(ABTB) 0.280 INCHES MINIMUM AND 0.286 INCHES MAXIMUM
MOUNTING HOLE QUANTITY
(ABTJ) 2
SPECIAL FEATURES
(FEAT) FIVE ADDITIONAL CLAMPING HOLES 0.250 MIN TO 0.256 MAX INCHES DIA
STYLE DESIGNATOR
(STYL) RECTANGULAR
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
(STDC) MIL-V-173 MIL SPEC SINGLE TREATMENT RESPONSE
SURFACE TREATMENT
(SFTT) VARNISH

Manufacturer Part Numbers


Related Inventory



 
Top