ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-01-274-0117, 5340012740117
CLAMP,LOOP

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 012740117
Codification Country
United States
Item Name Code
INC 17532
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: We have 1 qualified suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-01-274-0117
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-01-274-0117


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-01-274-0117

National Stock Number (NSN) 5340-01-274-0117, or NIIN 012740117, (clamp,loop) was assigned March 4, 1988 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There are 4 manufacturer part numbers associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 4 suppliers. Today, 4 suppliers are listed as Active suppliers for this NSN. Of the active suppliers, 3 suppliers are deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Sep 02, 2005, this NSN's acquisition method was noted as: Suitable for Competitive Acquisition. (Potential sources shall include dealers/distributors.) The Government physically does not have in its possession sufficient, accurate, or legible data to purchase this part from other than current source(s). (NOTE: This code is applicable only to parts under immediate buy requirements and only as long as the deficiency is under review for resolution and appropriate recoding.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 17532. [A CLAMP DESIGNED TO SURROUND OTHER ITEM(S) SUCH AS CABLE(S), CONDUIT(S), PIPE(S), HOSE(S), OR TUBE(S), AND TO FASTEN TOGETHER OR TO ANOTHER OBJECT OR STRUCTURE. INCLUDES STRAIGHT FLEXIBLE ITEMS. FOR ITEMS SPECIFICALLY DESIGNED TO CLAMP A HOSE TO A CONNECTION TO PREVENT LEAKAGE, SEE CLAMP, HOSE. SEE ALSO HANGER, PIPE AND CLIP, SPRING TENSION. FOR RETAINING STRAPS WITH A BRIDGE, SEE STRAP, RETAINING. EXCLUDES:CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340012740117 does not contain precious metals.

This information was last updated on .


Technical Characteristics

DISTANCE FROM LOOP CENTER TO TONGUE END
(AZDC) 0.780 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE
(AZCY) 0.592 INCHES NOMINAL
CUSHIONING ENVIRONMENTAL PROTECTION
(AAAP) HEAT
DIAMETER
(ABMZ) 0.204 INCHES NOMINAL
LOOP INSIDE DIAMETER
(BZTN) 0.360 INCHES MINIMUM AND 0.640 INCHES MAXIMUM
OVERALL WIDTH
(ABMK) 0.375 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) AMS 3651 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) AMS 5517 ASSN STD SINGLE MATERIAL RESPONSE OR MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE BAND
MATERIAL THICKNESS
(ABPX) 0.017 INCHES MINIMUM AND 0.023 INCHES MAXIMUM
MATERIAL
(MATT) PLASTIC POLYTETRAFLUOROETHYLENE CUSHION
MATERIAL
(MATT) STEEL COMP 301 BAND
STYLE DESIGNATOR
(STYL) OFFSET MOUNT
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
(STDC) QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE BAND
SURFACE TREATMENT
(SFTT) PASSIVATE BAND
TONGUE HOLE TYPE
(AAAL) ROUND, UNTHREADED

Manufacturer Part Numbers


Related Inventory

JM43LC7SH6T
5340012740117
Condition NS
CLAMP
Readily Available


 
Top