ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-01-286-2653, 5340012862653
BRACKET,DOUBLE ANGLE

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 012862653
Codification Country
United States
Item Name Code
INC 20354
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Request Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-01-286-2653
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-01-286-2653


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-01-286-2653

National Stock Number (NSN) 5340-01-286-2653, or NIIN 012862653, (bracket,double angle) was assigned September 29, 1988 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There are no manufacturer part numbers associated to this NSN.

This part number has not been procured by the US Government in over 5 years.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Sep 02, 2005, this NSN's acquisition method was noted as: Suitable for Competitive Acquisition. (Potential sources shall include dealers/distributors.) The Government has unlimited rights to the technical data, and the data package is complete. Valid AMCs: 1 and 2.

This NSN is assigned to Item Name Code (INC) 20354. [A RIGID ITEM USUALLY FABRICATED FROM FLAT MATERIAL, FORMING TWO ALTERNATE OR TWO ADJACENT INTERIOR ANGLES, BOTH WHICH MAY BE LESS THAN 180 DEGREES (3.141 RADIANS). IT IS DESIGNED TO POSITION, ALIGN, AND/OR SUPPORT AN ITEM. IT MAY BE REINFORCED. SEE ALSO BRACKET, ANGLE AND BRACKET (1), MOUNTING.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340012862653 does not contain precious metals.

This information was last updated on .


Technical Characteristics

CENTER SECTION HEIGHT
(AHPZ) 4.807 INCHES MINIMUM AND 4.817 INCHES MAXIMUM
CENTER SECTION THICKNESS
(AHQB) 0.125 INCHES NOMINAL
CENTER SECTION WIDTH
(AHQA) 3.120 INCHES NOMINAL
FIRST LEG ANGLE
(CSSQ) 90.0 DEGREES NOMINAL
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
(AHRA) 0.590 INCHES NOMINAL
FIRST LEG END RADIUS
(AJFP) 1.560 INCHES NOMINAL
FIRST LEG HOLE ARRANGEMENT STYLE
(AKAU) TWO HOLES
FIRST LEG HOLE DIAMETER
(AHLK) 0.266 INCHES NOMINAL
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH
(AHQX) 0.780 INCHES NOMINAL
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH
(AHQU) 0.970 INCHES NOMINAL
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
(AHRB) 0.560 INCHES NOMINAL
FIRST LEG STYLE
(AJZU) END RADIUS
FIRST LEG THICKNESS
(AHPW) 0.125 INCHES NOMINAL
FIRST LEG WIDTH
(AHQN) 3.120 INCHES NOMINAL
FIRST LEG LENGTH
(ADLK) 6.560 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) QQ-S-698,1/2 HARD FED SPEC SINGLE MATERIAL RESPONSE
MATERIAL
(MATT) STEEL
MOUNTING HOLE TYPE
(ACHY) PLAIN
SECOND LEG ANGLE
(CSSR) 90.0 DEGREES NOMINAL
SECOND LEG THICKNESS
(AHPX) 0.125 INCHES NOMINAL
SECOND LEG LENGTH
(ADLL) 6.560 INCHES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEG
(CSSP) IDENTICAL
SPECIAL FEATURES
(FEAT) FIRST AND SECOND LEG HAVE ONE 0.386 IN. DIA HOLE; CENTER SECTION HAS ONE 2.000 IN. DIA HOLE
STYLE DESIGNATOR
(STYL) ADJACENT ANGLES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
(STDC) MIL-P-23377 MIL SPEC SINGLE TREATMENT RESPONSE
SURFACE TREATMENT
(SFTT) PLASTIC EPOXY

Manufacturer Part Numbers


Related Inventory



 
Top