ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-01-288-6278, 5340012886278
BRACKET,DOUBLE ANGLE

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 012886278
Codification Country
United States
Item Name Code
INC 20354
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Request Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-01-288-6278
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-01-288-6278


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-01-288-6278

National Stock Number (NSN) 5340-01-288-6278, or NIIN 012886278, (bracket,double angle) was assigned November 11, 1988 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 3 suppliers. Today, 3 suppliers are listed as Active suppliers for this NSN. Of the active suppliers, 3 suppliers are deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

This NSN is somewhat common among different platforms, belonging to 3 different weapons systems.

There has been very little demand for this national stock number. The demand for this NSN originated from less than 5 countries. Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Oct 16, 2016, this NSN's acquisition method was noted as: Suitable for Competitive Acquisition. (Potential sources shall include dealers/distributors.) The Government physically does not have in its possession sufficient, accurate, or legible data to purchase this part from other than current source(s). (NOTE: This code is applicable only to parts under immediate buy requirements and only as long as the deficiency is under review for resolution and appropriate recoding.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 20354. [A RIGID ITEM USUALLY FABRICATED FROM FLAT MATERIAL, FORMING TWO ALTERNATE OR TWO ADJACENT INTERIOR ANGLES, BOTH WHICH MAY BE LESS THAN 180 DEGREES (3.141 RADIANS). IT IS DESIGNED TO POSITION, ALIGN, AND/OR SUPPORT AN ITEM. IT MAY BE REINFORCED. SEE ALSO BRACKET, ANGLE AND BRACKET (1), MOUNTING.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340012886278 does not contain precious metals.

This NSN is associated to Schedule B 7502200000: unwrought nickel alloys. The Schedule B End Use is listed as nonferrous metals, other.

This information was last updated on .


Technical Characteristics

CENTER SECTION THICKNESS
(AHQB) 0.076 INCHES MINIMUM AND 0.084 INCHES MAXIMUM
FEATURES PROVIDED
(CBBL) MOUNTING PAD
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
(AHRB) 0.380 INCHES MINIMUM AND 0.420 INCHES MAXIMUM
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
(AHRA) 0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
FIRST LEG HOLE ARRANGEMENT STYLE
(AKAU) FOUR HOLES
FIRST LEG HOLE DIAMETER
(AHLK) 0.098 INCHES MINIMUM AND 0.102 INCHES MAXIMUM
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH
(AHQX) 1.050 INCHES NOMINAL
FIRST LEG STYLE
(AJZU) CORNER RADIUS
FIRST LEG THICKNESS
(AHPW) 0.076 INCHES MINIMUM AND 0.084 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) AMS 5599 ASSN STD SINGLE MATERIAL RESPONSE
MATERIAL
(MATT) NICKEL ALLOY 625
MOUNTING HOLE TYPE
(ACHY) PLAIN
SECOND LEG RELATIONSHIP TO FIRST LEG
(CSSP) NOT IDENTICAL
SECOND LEG THICKNESS
(AHPX) 0.076 INCHES MINIMUM AND 0.084 INCHES MAXIMUM
SPECIAL FEATURES
(FEAT) THREE ARE TWO CLIP SPRING AND THE MOUNTING PAD ARE MADE OF NICKLE ALLOY 625 PER AMS 5599 OR AMS 5666
STYLE DESIGNATOR
(STYL) DOUBLE ANGLE

Manufacturer Part Numbers


Related Inventory



 
Top