ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-01-289-7875, 5340012897875
CLAMP,BLOCK

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 012897875
Codification Country
United States
Item Name Code
INC 37415
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Request Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-01-289-7875
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-01-289-7875


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-01-289-7875

National Stock Number (NSN) 5340-01-289-7875, or NIIN 012897875, (clamp,block) was assigned November 30, 1988 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by one supplier. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

This NSN is somewhat common among different platforms, belonging to 2 different weapons systems.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Dec 17, 2013, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The annual buy value of this part falls below the screening threshold of $10,000 but it has been screened for known source(s). (NOTE: This code shall not be used when screening parts entering the inventory. It shall not be assigned in preference to or supersede any other AMSC.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 37415. [A SQUARE OR RECTANGULAR MULTIPIECE ITEM DESIGNED TO BE ATTACHED TO ANOTHER OBJECT OR STRUCTURE. IT MUST HAVE ONE OR MORE HOLES DESIGNED TO SURROUND AND SECURELY GRIP ITEMS SUCH AS ELECTRICAL CABLES, CONDUITS, PIPES, TUBES AND/OR HOSES. IT MAY HAVE ONE OR MORE HOLES DESIGNED TO PREVENT SNAGGING OR CHAFING AND PROVIDE SUPPORT AND/OR GUIDANCE TO MOVING CABLE PASSING THROUGH IT. IT MAY HAVE AN INTEGRAL CLAMPING FEATURE. FOR ITEMS SPECIFICALLY DESIGNED TO SERVE AS A GUIDE, SEE FAIRLEAD, BLOCK AND FAIRLEAD SECTION, BLOCK. EXCLUDES:BRACKET, PIPE.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340012897875 does not contain precious metals.

This information was last updated on .


Technical Characteristics

DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH
(AFEC) 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER
(CWXN) 0.600 INCHES NOMINAL
DISTANCE FROM END TO FIRST MOUNTING HOLE CENTER
(CWXC) 0.255 INCHES NOMINAL
BLOCK HEIGHT
(BYGG) 0.786 INCHES NOMINAL
CABLE DIAMETER FOR WHICH DESIGNED
(CBSM) 1.250 INCHES NOMINAL ALL HOLES
CLAMPING HOLE DIAMETER
(CWWM) 1.344 INCHES MINIMUM ALL HOLES AND 1.356 INCHES MAXIMUM ALL HOLES
CLAMPING HOLE QUANTITY
(CWTD) 1
OVERALL HEIGHT
(ABKW) 1.572 INCHES NOMINAL
OVERALL LENGTH
(ABHP) 1.860 INCHES MINIMUM AND 1.900 INCHES MAXIMUM
OVERALL WIDTH
(ABMK) 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) AMS 5645 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5646 ASSN STD SINGLE MATERIAL RESPONSE
MATERIAL
(MATT) STEEL CORROSION RESISTING
MOUNTING HOLE DIAMETER
(ABTB) 0.274 INCHES MINIMUM AND 0.288 INCHES MAXIMUM
MOUNTING FACILITY
(AZGM) UNTHREADED HOLE
MOUNTING HOLE QUANTITY
(ABTJ) 1
STYLE DESIGNATOR
(STYL) RECTANGULAR

Manufacturer Part Numbers


Related Inventory



 
Top