ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-01-298-3176, 5340012983176
STRAP,RETAINING

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 012983176
Codification Country
United States
Item Name Code
INC 05072
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-01-298-3176
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-01-298-3176


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-01-298-3176

National Stock Number (NSN) 5340-01-298-3176, or NIIN 012983176, (strap,retaining) was assigned April 14, 1989 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. One of those part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by one supplier. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, there are no suppliers that are deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

This NSN is fairly common among different weapons systems, belonging to 18 different platforms.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Aug 08, 2007, this NSN's acquisition method was noted as: Suitable for competitive acquisition for the first time. (Potential sources shall include dealers/distributors.) The Government has unlimited rights to the technical data, and the data package is complete. Valid AMCs: 1 and 2.

This NSN is assigned to Item Name Code (INC) 05072. [A PREFORMED ITEM OF RIGID OR SEMIRIGID MATERIAL DESIGNED TO PARTIALLY SURROUND OTHER ITEMS SUCH AS CABLE(S), CONDUIT(S), PIPE(S), TUBE(S), OR ROD(S) OR TO COMPLETELY SURROUND THEM BY MEANS OF A BRIDGE STRAP(S) (WHICH DOES NOT TIGHTLY CLAMP AGAINST THE COMPLETE PERIPHERY). IT IS DESIGNED TO RETAIN AND/OR POSITION THE ITEMS CLOSE TO A STRUCTURE. IT MAY BE FASTENED TO THE STRUCTURE ON ONE END, BOTH ENDS, OR IN THE CENTER. SEE ALSO CLAMP, LOOP. EXCLUDES:BRACKET, PIPE; STRAP, LEATHER AND STRAP, WEBBING.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340012983176 does not contain precious metals.

This information was last updated on .


Technical Characteristics

CENTER TO CENTER DISTANCE BETWEEN ARCH AND MOUNTING HOLE
(BYMR) 0.495 INCHES NOMINAL
CUSHION
(BXQG) NOT INCLUDED
DISTANCE BETWEEN BASE AND INSIDE OF ARCH
(BYMM) 0.620 INCHES NOMINAL
DISTANCE BETWEEN MOUNTING HOLE CENTERS
(AFQM) 2.000 INCHES NOMINAL
INSIDE DIAMETER/ARCH LENGTH
(BYMP) 0.500 INCHES NOMINAL
OVERALL LENGTH
(ABHP) 1.180 INCHES MINIMUM AND 1.300 INCHES MAXIMUM
OVERALL WIDTH
(ABMK) 2.250 INCHES NOMINAL
MATERIAL THICKNESS
(ABPX) 0.040 INCHES NOMINAL
MOUNTING HOLE SIZE
(BYML) 0.120 INCHES MINIMUM AND 0.126 INCHES MAXIMUM
MOUNTING PAD
(BXQJ) NOT INCLUDED
SPECIAL FEATURES
(FEAT) RETAINING STRAP FORMED OF TWO IDENTICAL CURVED ARCH FINGERS IN A PARALLEL INLINE CONFIGURATION WHICH IS JOINED AT ONE END BY A LINKING BAND 0.250 IN. MIN 0.310 IN. MAX W; CONSTRUCTION MATERIAL IS GRAIN ORIENTED ALONG THE LONGITUDINAL AXIS OF THE FINGERS; ALL INTERNAL AND EXTERNAL CORNERS ROUNDED 0.060 IN. RADIUS; BEND RADIUS 0.060 IN. FOUR PLACES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
(STDC) QQ-N-290,CL 1,GR D FED SPEC SINGLE TREATMENT RESPONSE
SURFACE TREATMENT
(SFTT) NICKEL
UNABLE TO DECODE
(SURF) UNABLE TO DECODE
SURFACE TREATMENT
(SFTT) NICKEL,QQ-N-290,CL 1,GR D
SURFACE TREATMENT
(SURF) NICKEL,QQ-N-290,CL 1,GR D

Manufacturer Part Numbers


Related Inventory

1616675-104
Condition FN
Desc: SEAL; MOQ
Readily Available
1616675-103
Condition FN
Desc: SEAL; MOQ
Readily Available


 
Top