ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-01-314-4017, 5340013144017
CLAMP,BLOCK

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 013144017
Codification Country
United States
Item Name Code
INC 37415
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Request Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-01-314-4017
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-01-314-4017


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-01-314-4017

National Stock Number (NSN) 5340-01-314-4017, or NIIN 013144017, (clamp,block) was assigned January 29, 1990 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by one supplier. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Sep 02, 2005, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The Government physically does not have in its possession sufficient, accurate, or legible data to purchase this part from other than current source(s). (NOTE: This code is applicable only to parts under immediate buy requirements and only as long as the deficiency is under review for resolution and appropriate recoding.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 37415. [A SQUARE OR RECTANGULAR MULTIPIECE ITEM DESIGNED TO BE ATTACHED TO ANOTHER OBJECT OR STRUCTURE. IT MUST HAVE ONE OR MORE HOLES DESIGNED TO SURROUND AND SECURELY GRIP ITEMS SUCH AS ELECTRICAL CABLES, CONDUITS, PIPES, TUBES AND/OR HOSES. IT MAY HAVE ONE OR MORE HOLES DESIGNED TO PREVENT SNAGGING OR CHAFING AND PROVIDE SUPPORT AND/OR GUIDANCE TO MOVING CABLE PASSING THROUGH IT. IT MAY HAVE AN INTEGRAL CLAMPING FEATURE. FOR ITEMS SPECIFICALLY DESIGNED TO SERVE AS A GUIDE, SEE FAIRLEAD, BLOCK AND FAIRLEAD SECTION, BLOCK. EXCLUDES:BRACKET, PIPE.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340013144017 does not contain precious metals.

This information was last updated on .


Technical Characteristics

MOUNTING FACILITY
(AZGM) UNTHREADED HOLE
CABLE DIAMETER FOR WHICH DESIGNED
(CBSM) 0.375 INCHES NOMINAL FIRST HOLE
CABLE DIAMETER FOR WHICH DESIGNED
(CBSM) 0.375 INCHES NOMINAL SECOND HOLE
CLAMPING HOLE DIAMETER
(CWWM) 0.375 INCHES NOMINAL FIRST HOLE
CLAMPING HOLE DIAMETER
(CWWM) 0.375 INCHES NOMINAL SECOND HOLE
CLAMPING HOLE DIAMETER
(CWWM) 0.250 INCHES NOMINAL FOURTH HOLE
CLAMPING HOLE DIAMETER
(CWWM) 0.250 INCHES NOMINAL THIRD HOLE
CABLE DIAMETER FOR WHICH DESIGNED
(CBSM) 0.250 INCHES NOMINAL FOURTH HOLE
CABLE DIAMETER FOR WHICH DESIGNED
(CBSM) 0.250 INCHES NOMINAL THIRD HOLE
BLOCK HEIGHT
(BYGG) 0.610 INCHES NOMINAL
CABLE DIAMETER FOR WHICH DESIGNED
(CBSM) UNABLE TO DECODE
CENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD CLAMPING HOLES
(CWYC) 0.700 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD MOUNTING HOLES
(AXPE) 2.970 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN FIRST AND FOURTH CLAMPING HOLES
(CWYH) 0.820 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND CLAMPING HOLES
(CWXZ) 0.620 INCHES NOMINAL
CLAMPING HOLE DIAMETER
(CWWM) UNABLE TO DECODE
CLAMPING HOLE QUANTITY
(CWTD) 7
DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH
(AFEC) 0.310 INCHES NOMINAL
DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER
(CWXN) 0.720 INCHES NOMINAL
DISTANCE FROM END TO FIRST MOUNTING HOLE CENTER
(CWXC) 0.310 INCHES NOMINAL
MATERIAL
(MATT) ALUMINUM ALLOY 7075
MOUNTING HOLE DIAMETER
(ABTB) 0.198 INCHES NOMINAL
MOUNTING FACILITY
(AZGM) UNTHREADED HOLE(S)
MOUNTING HOLE QUANTITY
(ABTJ) 2
OVERALL HEIGHT
(ABKW) 2.190 INCHES MINIMUM AND 2.310 INCHES MAXIMUM
OVERALL LENGTH
(ABHP) 3.590 INCHES NOMINAL
OVERALL WIDTH
(ABMK) 0.628 INCHES NOMINAL
SPECIAL FEATURES
(FEAT) INCL TWO REINFORCING CHANNELS AND TWO CORK AND RUBBER CUSHION PANELS,AMS 3252 CEMENTED TO BLOCK FACES; BLOCK C/O THREE SECTIONS W/TWO ROWS OF HOLES AT THE INTERSTICES; FOUR HOLES IN ONE ROW AND THREE HOLES IN THE OTHER ROW; SECOND ROW HOLES INCL TWO W/0.500 IN. DIA AND ONE 0.375 IN. DIA; INFORMATION CONTAINED HEREIN IS AN AUTHORIZED DEVIATION FROM EXISTING TECHNICAL DATA FOR USE LOCALLY BY NAVAIREWORKFAC PENSACOLA ONLY

Manufacturer Part Numbers


Related Inventory



 
Top