ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-01-317-4160, 5340013174160
RETAINER,HELICAL COMPRESSION SPR

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 013174160
Codification Country
United States
Item Name Code
INC 24327
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-01-317-4160
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-01-317-4160


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-01-317-4160

National Stock Number (NSN) 5340-01-317-4160, or NIIN 013174160, (retainer,helical compression spr) was assigned March 29, 1990 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There are 2 manufacturer part numbers associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 2 suppliers. Today, 2 suppliers are listed as Active suppliers for this NSN. Of the active suppliers, there are no suppliers that are deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

This NSN is somewhat common among different platforms, belonging to 3 different weapons systems.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Sep 02, 2005, this NSN's acquisition method was noted as: Not established. Not established.

This NSN is assigned to Item Name Code (INC) 24327. [A CYLINDRICAL ITEM SPECIFICALLY DESIGNED TO FIT OVER THE END OF AND COMPLETELY ENCASE THE SPRING. THE OPEN END IS USUALLY FLANGED; THE OPPOSITE END MAY BE CLOSED OR HAVE AN ORIFICE TO ACCOMMODATE A GUIDE, PLUNGER, OR THE LIKE. IT IS USED TO POSITION THE SPRING AND RESTRAIN LATERAL MOTION. IT MAY PROVIDE A SEAT FOR THE SPRING. EXCLUDES:HOLDER,SPRING.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340013174160 does not contain precious metals.

This information was last updated on .


Technical Characteristics

MATERIAL
(MATL) STEEL, AISI 1015 OR STEEL, AISI 1016 OR STEEL, AISI 1017 OR STEEL, AISI 1018 OR STEEL, AISI 1019 OR STEEL, AISI 1020 OR STEEL, AISI 1021 OR STEEL, AISI 1022 OR STEEL, AISI 1023 OR STEEL, AISI 1024 OR STEEL, AISI 1025
SURFACE TREATMENT
(SURF) PHOSPHATE MANGANESE,DOD-P-16232,TY M,CL 1
UNABLE TO DECODE
(SURF) UNABLE TO DECODE
UNABLE TO DECODE
(MATL) UNABLE TO DECODE OR UNABLE TO DECODE
END HOLE DIAMETER
(BWRC) 0.150 INCHES MINIMUM AND 0.760 INCHES MAXIMUM
BODY INSIDE DIAMETER
(ADAS) 0.500 INCHES NOMINAL
BODY OUTSIDE DIAMETER
(ADAR) 1.248 INCHES MINIMUM AND 1.249 INCHES MAXIMUM
BOLT CIRCLE DIAMETER
(ABKG) 1.500 INCHES NOMINAL
CASEHARDENING INDICATOR
(AASG) NOT CASEHARDENED
FLANGE DIAMETER
(ABKK) 2.177 INCHES MINIMUM AND 2.187 INCHES MAXIMUM
FLANGE THICKNESS
(ABKU) 0.312 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) AISI 1015 ASSN STD 1ST MATERIAL RESPONSE AND AISI 1016 ASSN STD 2ND MATERIAL RESPONSE AND AISI 1017 ASSN STD 3RD MATERIAL RESPONSE AND AISI 1018 ASSN STD 4TH MATERIAL RESPONSE AND AISI 1019 ASSN STD 5TH MATERIAL RESPONSE AND AISI 1020 ASSN STD 6TH MATERIAL RESPONSE AND AISI 1021 ASSN STD 7TH MATERIAL RESPONSE AND AISI 1022 ASSN STD 8TH MATERIAL RESPONSE AND AISI 1023 ASSN STD 9TH MATERIAL RESPONSE AND AISI 1024 ASSN STD 10TH MATERIAL RESPONSE AND AISI 1025 ASSN STD 11TH MATERIAL RESPONSE
MATERIAL
(MATT) STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1023 OR STEEL COMP 1524 OR STEEL COMP 1025
MOUNTING HOLE DIAMETER
(ABTB) 0.404 INCHES MINIMUM AND 0.414 INCHES MAXIMUM
OVERALL HEIGHT
(ABKW) 2.437 INCHES NOMINAL
STYLE DESIGNATOR
(STYL) IRREGULAR
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
(STDC) DOD-P-16232,TY M,CL 1 DEF STAN/SPEC SINGLE TREATMENT RESPONSE
SURFACE TREATMENT
(SFTT) PHOSPHATE MANGANESE

Manufacturer Part Numbers


Related Inventory

44A1121-22-26-9
WM44A1121-22-2/6
Condition NE

Readily Available
82A1121-22-26-9
WM82A1121-22-2/6
Condition NE

Request
55A1821-22-26-9C
WM55A1821-22-2/6
Condition NE

Request
55PC1121-22-26-9
WM55PC1121-22-2/
Condition NE

Request
55A1821-22-26-9CK505
WM55A1821-22-2/6
Condition NE

Request
55A1821-222-6-9
WM55A1821-22/2-6
Condition NE

Request
55A1121-22-26-9
WM55A1121-22-2/6
Condition NE

Request
44AM1121-22-26-9
WM44AM1121-22-2/
Condition NE

Request


 
Top