ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-01-320-3583, 5340013203583
BRACKET,DOUBLE ANGLE

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 013203583
Codification Country
United States
Item Name Code
INC 20354
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-01-320-3583
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-01-320-3583


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-01-320-3583

National Stock Number (NSN) 5340-01-320-3583, or NIIN 013203583, (bracket,double angle) was assigned May 23, 1990 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There are no manufacturer part numbers associated to this NSN.

This part number has not been procured by the US Government in over 5 years.

This NSN is unique to one weapons system.

There has been very little demand for this national stock number. The demand for this NSN originated from less than 5 countries. Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Aug 13, 2010, this NSN's acquisition method was noted as: Suitable for Competitive Acquisition. (Potential sources shall include dealers/distributors.) The Government has unlimited rights to the technical data, and the data package is complete. Valid AMCs: 1 and 2.

This NSN is assigned to Item Name Code (INC) 20354. [A RIGID ITEM USUALLY FABRICATED FROM FLAT MATERIAL, FORMING TWO ALTERNATE OR TWO ADJACENT INTERIOR ANGLES, BOTH WHICH MAY BE LESS THAN 180 DEGREES (3.141 RADIANS). IT IS DESIGNED TO POSITION, ALIGN, AND/OR SUPPORT AN ITEM. IT MAY BE REINFORCED. SEE ALSO BRACKET, ANGLE AND BRACKET (1), MOUNTING.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340013203583 does not contain precious metals.

This information was last updated on .


Technical Characteristics

CENTER SECTION HEIGHT
(AHPZ) 0.5576 INCHES NOMINAL
CENTER SECTION THICKNESS
(AHQB) 0.1196 INCHES NOMINAL
CENTER SECTION WIDTH
(AHQA) 6.969 INCHES MINIMUM AND 7.031 INCHES MAXIMUM
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH
(AHQU) 6.000 INCHES NOMINAL
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
(AHRB) 0.500 INCHES NOMINAL
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
(AHRA) 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM
FIRST LEG ANGLE
(CSSQ) 90.0 DEGREES NOMINAL
FIRST LEG LENGTH
(ADLK) 1.094 INCHES MINIMUM AND 1.156 INCHES MAXIMUM
FIRST LEG STYLE
(AJZU) SQUARE
FIRST LEG THICKNESS
(AHPW) 0.1196 INCHES NOMINAL
FIRST LEG HOLE ARRANGEMENT STYLE
(AKAU) TWO HOLES
FIRST LEG HOLE DIAMETER
(AHLK) 0.406 INCHES NOMINAL
FIRST LEG WIDTH
(AHQN) 6.969 INCHES MINIMUM AND 7.031 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) MIL-S-18729,COND A MIL SPEC SINGLE MATERIAL RESPONSE
MATERIAL
(MATT) STEEL COMP 4140
MOUNTING HOLE TYPE
(ACHY) PLAIN
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH
(AHLP) 6.000 INCHES NOMINAL
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
(AHLW) 0.438 INCHES NOMINAL
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
(AHLV) 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM
SECOND LEG ANGLE
(CSSR) 90.0 DEGREES NOMINAL
SECOND LEG LENGTH
(ADLL) 1.6826 INCHES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEG
(CSSP) NOT IDENTICAL
SECOND LEG HOLE ARRANGEMENT STYLE
(AKCU) TWO HOLES
SECOND LEG HOLE DIAMETER
(AHLN) 0.390 INCHES NOMINAL
SECOND LEG STYLE
(AKBU) SQUARE
SECOND LEG THICKNESS
(AHPX) 0.1196 INCHES NOMINAL
SECOND LEG WIDTH
(AHLF) 6.969 INCHES MINIMUM AND 7.031 INCHES MAXIMUM
STYLE DESIGNATOR
(STYL) DOUBLE ANGLE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
(STDC) DOD-P-16232,TY M,CL 4 MIL SPEC SINGLE TREATMENT RESPONSE
SURFACE TREATMENT
(SFTT) PHOSPHATE

Manufacturer Part Numbers


Related Inventory

G911111748
TC82U19
Condition NE
Transom Chain 1
Readily Available
11-11748
EIS-6K-LYC-BAS-P
Condition NE
GRT EIS Lycomin
Readily Available


 
Top