ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-01-354-9678, 5340013549678
CLAMP,BLOCK,SECTION

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 013549678
Codification Country
United States
Item Name Code
INC 39404
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: We have 1 qualified suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-01-354-9678
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-01-354-9678


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-01-354-9678

National Stock Number (NSN) 5340-01-354-9678, or NIIN 013549678, (clamp,block,section) was assigned March 9, 1992 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 2 suppliers. Today, 2 suppliers are listed as Active suppliers for this NSN. Of the active suppliers, 2 suppliers are deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over a year. There have been 3 contracts issued for this part number, with 5 awards given. The US Government has only awarded those contracts to one supplier. The last contract numbers awarded were: SPE7L420V0334, SPE5E720P0751, SPM75002D9724, SPM75002D9724, SPM75002D9724. The total value of the awarded contracts has been US$ 12,259.38.

This NSN is unique to one weapons system.

There has been very little demand for this national stock number. The demand for this NSN originated from less than 5 countries. Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Sep 20, 2008, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The annual buy value of this part falls below the screening threshold of $10,000 but it has been screened for known source(s). (NOTE: This code shall not be used when screening parts entering the inventory. It shall not be assigned in preference to or supersede any other AMSC.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 39404. [A SINGLE PIECE OF MULTIPIECE CLAMP, BLOCK. FOR ITEMS SPECIFICALLY DESIGNED TO SERVE AS A GUIDE, SEE FAIRLEAD BLOCK AND FAIRLEAD SECTION, BLOCK. EXCLUDES:BRACKET, PIPE.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340013549678 does not contain precious metals.

This information was last updated on .


Technical Characteristics

DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH
(AFEC) 0.500 INCHES NOMINAL
DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER
(CWXN) 2.505 INCHES NOMINAL
DISTANCE FROM END TO FIRST MOUNTING HOLE CENTER
(CWXC) 0.625 INCHES NOMINAL
BLOCK HEIGHT
(BYGG) 0.720 INCHES MINIMUM AND 0.780 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN FIRST AND FIFTH CLAMPING HOLES
(CWYM) 4.120 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN FIRST AND FOURTH CLAMPING HOLES
(CWYH) 3.370 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND CLAMPING HOLES
(CWXZ) 0.750 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND MOUNTING HOLES
(AXPC) 2.431 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SIXTH CLAMPING HOLES
(CWYS) 6.680 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD CLAMPING HOLES
(CWYC) 2.620 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD MOUNTING HOLES
(AXPE) 7.804 INCHES NOMINAL
CLAMPING HOLE DIAMETER
(CWWM) 0.250 INCHES MINIMUM ALL HOLES AND 0.310 INCHES MAXIMUM ALL HOLES0.190 INCHES MINIMUM FIRST HOLE AND 0.250 INCHES MAXIMUM FIRST HOLE0.380 INCHES MINIMUM SECOND HOLE AND 0.440 INCHES MAXIMUM SECOND HOLE
CLAMPING HOLE QUANTITY
(CWTD) 6
OVERALL LENGTH
(ABHP) 9.750 INCHES MINIMUM AND 9.870 INCHES MAXIMUM
OVERALL WIDTH
(ABMK) 0.940 INCHES MINIMUM AND 1.060 INCHES MAXIMUM
MOUNTING FACILITY
(AZGM) UNTHREADED HOLE
MOUNTING HOLE DIAMETER
(ABTB) 0.350 INCHES MINIMUM AND 0.410 INCHES MAXIMUM
MOUNTING HOLE QUANTITY
(ABTJ) 3
STYLE DESIGNATOR
(STYL) RECTANGULAR

Manufacturer Part Numbers


Related Inventory

12948171
5340-01-354-9678
Request


 
Top