ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-01-365-3335, 5340013653335
BUTTON,PLUG

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 013653335
Codification Country
United States
Item Name Code
INC 11251
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-01-365-3335
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-01-365-3335


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-01-365-3335

National Stock Number (NSN) 5340-01-365-3335, or NIIN 013653335, (button,plug) was assigned October 6, 1992 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. One of those part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 2 suppliers. Today, 2 suppliers are listed as Active suppliers for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

This NSN is unique to one weapons system.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Sep 02, 2005, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The Government physically does not have in its possession sufficient, accurate, or legible data to purchase this part from other than current source(s). (NOTE: This code is applicable only to parts under immediate buy requirements and only as long as the deficiency is under review for resolution and appropriate recoding.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 11251. [AN ITEM, USUALLY MADE OF METAL, HAVING A FINISHED CAP WITH SPRING TENSION PRONGS ON THE UNDERSIDE, OR SPRING WIRE FITTED INTO THE SIDES OF THE WALLS. WHEN INSERTED IN PUNCHED OR DRILLED HOLES IN METAL SHEETS OR TUBES, THE EXPANDING ACTION OF THE PRONGS OR SPRING WIRE HOLDS THE ITEM SECURELY IN PLACE. IT IS SPECIFICALLY DESIGNED TO CLOSE A HOLE; TO COVER A HOLE THROUGH WHICH PASSES A SHAFT, CABLE, OR THE LIKE; OR TO PROVIDE A PERFORATED COVER FOR A VENT OR BREATHER HOLE. EXCLUDES FASTENER, SPRING TENSION, TRIM.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340013653335 does not contain precious metals.

This information was last updated on .


Technical Characteristics

III MATERIAL
(MATT) STEEL COMP 1010
HEAD HEIGHT
(AASU) 0.062 INCHES NOMINAL
HEAD OUTSIDE DIAMETER
(AGPW) 0.500 INCHES NOMINAL
HOLE ACCOMMODATION DIAMETER
(AKRM) 0.375 INCHES NOMINAL
MATERIAL ACCOMMODATED THICKNESS
(AGSM) 0.037 INCHES MINIMUM AND 0.062 INCHES MAXIMUM
OVERALL HEIGHT
(ABKW) 0.219 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) SAE 1010 ASSN STD SINGLE MATERIAL RESPONSE
MATERIAL
(MATT) STEEL COMP 1010
PRONG OUTSIDE DIAMETER
(BZFZ) 0.395 INCHES MINIMUM AND 0.405 INCHES MAXIMUM
PRONG QUANTITY
(BZNN) 6
STYLE DESIGNATOR
(STYL) STANDARD

Manufacturer Part Numbers


Related Inventory

BACP20B64
Readily Available
BACP20B6
Condition FN
Readily Available
BACP20B6P
Condition FN
Readily Available
BACP20B63
Condition FN
Readily Available
BACP20B63P
Condition FN
Readily Available
BACP20B65
Condition FN
Readily Available
7671CBACP20B64
Condition NE
PLUG
Readily Available
BACP20B65P
PLUG BUTTON
Readily Available
BACP20B64B
5340010960661
Condition NS
BUTTON
Readily Available
BACP20B63B
5340002708552
Condition NS
BUTTON
Readily Available


 
Top