ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-01-365-8295, 5340013658295
STANDOFF,THREADED,SPACING

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 013658295
Codification Country
United States
Item Name Code
INC 40280
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Request Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-01-365-8295
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-01-365-8295


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-01-365-8295

National Stock Number (NSN) 5340-01-365-8295, or NIIN 013658295, (standoff,threaded,spacing) was assigned October 15, 1992 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by one supplier. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Aug 28, 2015, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The data needed to produce this item from additional sources is not physically available. Valid AMCs: 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 40280. [A STANDOFF THAT MUST HAVE A THREADED END(S) OR BE INTERNALLY THREADED ITS FULL LENGTH. FOR ITEMS HAVING EXTERNAL THREADS ON BOTH ENDS, SEE STUD (AS MODIFIED). FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME FOR THE ENTIRE LENGTH, ARE FLAT ON TOP AND BOTTOM, HAVING INTERNAL THREADS ITS FULL LENGTH, AND THE LENGTH DOES NOT EXCEED TWICE THE WIDTH ACROSS THE FLATS OR OUTSIDE DIAMETER, SEE NUT (AS MODIFIED); USE MAXIMUM DIMENSIONS(S) FOR COMPLIANCE.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340013658295 does not contain precious metals.

This information was last updated on .


Technical Characteristics

FIRST INTERNAL THREAD LENGTH (NON-CORE)
(CMPR) 0.120 INCHES NOMINAL
MATERIAL (NON-CORE)
(MATL) COPPER-BERYLLIUM, QQ-C-530, ALLOY 172
CROSS-SECTIONAL SHAPE
(ANLR) ROUND
DIAMETER
(ABMZ) 0.085 INCHES MINIMUM AND 0.087 INCHES MAXIMUM
LENGTH
(ABRY) 0.685 INCHES NOMINAL
SPECIAL FEATURES
(FEAT) 1 END HAS ID OF 0.035 X 0.450 IN. DP CSK 90 DEG X 0.048 IN. DIA,THIS END TO BE CRIMPED TO DIA 0.029 TO 0.031 IN. PRIOR TO HEAT TREATMENT PER MIL-H-7199,THE OPPOSITE END HAS ID OF 0.022 IN. X 0.170 IN.DP & CSK 90 DEG X 0.040 IN. DIA,THIS END IS CRIMPED TO DIA 0.160 TO 0.190 IN. PRIOR TO HEAT TRMT; ADDTL TRMTS ARE COPPER PLATING PER MIL-C-14550 CL3,NICKEL PLATING PER QQ-N-290 CL2 GRADE G,BOTH PLATINGS HAS THICKNESS OF 0.0002 MINIMUM,GOLD PLATI PER MIL-G-45204 TYPE 2 GRADE B OR C,CL1 W/THICKNESS OF 0.00005 MINIMUM; USED ON AN/APQ-171
STYLE DESIGNATOR
(STYL) LEFT INTERNAL AND RIGHT INTERNAL THREADS
SECOND INTERNAL THREAD LENGTH (NON-CORE)
(CMPS) 0.120 INCHES NOMINAL
SURFACE TREATMENT (NON-CORE)
(SURF) COPPER PLATED, MIL-C-14550 AND NICKEL AND GOLD

Manufacturer Part Numbers


Related Inventory



 
Top