ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-01-430-3838, 5340014303838
BRACKET,DOUBLE ANGLE

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 014303838
Codification Country
United States
Item Name Code
INC 20354
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Request Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-01-430-3838
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-01-430-3838


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-01-430-3838

National Stock Number (NSN) 5340-01-430-3838, or NIIN 014303838, (bracket,double angle) was assigned April 28, 1996 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. One of those part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 2 suppliers. Today, 2 suppliers are listed as Active suppliers for this NSN. Of the active suppliers, 2 suppliers are deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

This NSN is unique to one weapons system.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Sep 02, 2005, this NSN's acquisition method was noted as: Suitable for Competitive Acquisition. (Potential sources shall include dealers/distributors.) This part requires engineering source approval by the design control activity in order to maintain the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 20354. [A RIGID ITEM USUALLY FABRICATED FROM FLAT MATERIAL, FORMING TWO ALTERNATE OR TWO ADJACENT INTERIOR ANGLES, BOTH WHICH MAY BE LESS THAN 180 DEGREES (3.141 RADIANS). IT IS DESIGNED TO POSITION, ALIGN, AND/OR SUPPORT AN ITEM. IT MAY BE REINFORCED. SEE ALSO BRACKET, ANGLE AND BRACKET (1), MOUNTING.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340014303838 contains an unknown precious metal.

This information was last updated on .


Technical Characteristics

CENTER SECTION HEIGHT
(AHPZ) 1.030 INCHES NOMINAL
CENTER SECTION THICKNESS
(AHQB) 0.040 INCHES NOMINAL
CENTER SECTION WIDTH
(AHQA) 0.620 INCHES NOMINAL
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
(AHRB) 0.280 INCHES NOMINAL
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
(AHRA) 0.310 INCHES NOMINAL
FIRST LEG ANGLE
(CSSQ) 0.060 RADIANS NOMINAL
FIRST LEG CHAMFER ANGLE
(CWPD) 45.0 DEGREES NOMINAL
FIRST LEG STYLE
(AJZU) CHAMFERED ENDS
FIRST LEG THICKNESS
(AHPW) 0.040 INCHES NOMINAL
FIRST LEG END WIDTH
(AHQQ) 0.420 INCHES NOMINAL
FIRST LEG HOLE ARRANGEMENT STYLE
(AKAU) ONE HOLE
FIRST LEG HOLE DIAMETER
(AHLK) 0.155 INCHES MINIMUM AND 0.161 INCHES MAXIMUM
FIRST LEG LENGTH
(ADLK) 0.460 INCHES NOMINAL
FIRST LEG WIDTH
(AHQN) 0.620 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) QQ-S-766,CL302,COND A FED SPEC SINGLE MATERIAL RESPONSE
MATERIAL
(MATT) STEEL COMP 302
SPECIAL FEATURES
(FEAT) ASSEMBLY INCLUDES;REINFORCEMENT PLATE ALONG SECOND LEG LENGTH DIMENSIONS,2.050 INCH IN LENGTH,.620 INCH IN WIDTH;INSULATED SLEEVE P/N-M23053/5-109-0;SOLID COUNTERSUNK RIVET P/N-MS20426AD2-3;SELF-LOCKING PLATE NUT P/N-NAS1068RX06
SECOND LEG ANGLE
(CSSR) 0.060 RADIANS NOMINAL
SECOND LEG LENGTH
(ADLL) 2.420 INCHES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEG
(CSSP) NOT IDENTICAL
SECOND LEG HOLE ARRANGEMENT STYLE
(AKCU) NO HOLE
SECOND LEG STYLE
(AKBU) EXTENDED HOOK
SECOND LEG THICKNESS
(AHPX) 0.040 INCHES NOMINAL
SECOND LEG WIDTH
(AHLF) 0.620 INCHES NOMINAL
STYLE DESIGNATOR
(STYL) DOUBLE ANGLE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
(STDC) ASTM A380 ASSN STD SINGLE TREATMENT RESPONSE
SURFACE TREATMENT
(SFTT) PASSIVATE
SPECIAL FEATURES
(FEAT) UASSEMBLY INCLUDES;REINFORCEMENT PLATE ALONG SECOND LEG LENGTH DIMENSIONS,2.050 INCH IN LENGTH,.620 INCH IN WIDTH;INSULATED SLEEVE P/N-M23053/5-109-0;SOLID COUNTERSUNK RIVET P/N-MS20426AD2-3;SELF-LOCKING PLATE NUT P/N-NAS1068RX06

Manufacturer Part Numbers


Related Inventory



 
Top