ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-01-439-5742, 5340014395742
RETAINER,HELICAL COMPRESSION SPR

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 014395742
Codification Country
United States
Item Name Code
INC 24327
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-01-439-5742
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-01-439-5742


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-01-439-5742

National Stock Number (NSN) 5340-01-439-5742, or NIIN 014395742, (retainer,helical compression spr) was assigned December 12, 1996 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There are 2 manufacturer part numbers associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 3 suppliers. Today, 2 suppliers are listed as Active suppliers for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years, with the most recent procurement date of May 31, 2013. There have been 2 contracts issued for this part number, with 2 awards given. There is minimal competition for this NSN. The US Government has awarded contracts to 2 different suppliers. The last contract numbers awarded were: SPM5EK13M4250, SPM7L310MA216. The total value of the awarded contracts has been US$ 2,278.40.

There has been very little demand for this national stock number. The demand for this NSN originated from less than 5 countries. Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Apr 26, 2008, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The annual buy value of this part falls below the screening threshold of $10,000 but it has been screened for known source(s). (NOTE: This code shall not be used when screening parts entering the inventory. It shall not be assigned in preference to or supersede any other AMSC.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 24327. [A CYLINDRICAL ITEM SPECIFICALLY DESIGNED TO FIT OVER THE END OF AND COMPLETELY ENCASE THE SPRING. THE OPEN END IS USUALLY FLANGED; THE OPPOSITE END MAY BE CLOSED OR HAVE AN ORIFICE TO ACCOMMODATE A GUIDE, PLUNGER, OR THE LIKE. IT IS USED TO POSITION THE SPRING AND RESTRAIN LATERAL MOTION. IT MAY PROVIDE A SEAT FOR THE SPRING. EXCLUDES:HOLDER,SPRING.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340014395742 does not contain precious metals.

This information was last updated on .


Technical Characteristics

END HOLE DIAMETER
(BWRC) 40.0200 INCHES MINIMUM AND 40.0600 INCHES MAXIMUM
BODY OUTSIDE DIAMETER
(ADAR) 69.8000 INCHES MINIMUM AND 69.8500 INCHES MAXIMUM
CASEHARDENING INDICATOR
(AASG) NOT CASEHARDENED
MATERIAL
(MATT) STEEL CORROSION RESISTING
OVERALL HEIGHT
(ABKW) 18.0000 INCHES MINIMUM AND 18.3000 INCHES MAXIMUM
STYLE DESIGNATOR
(STYL) PARALLEL
MATERIAL
(MATL) STEEL, CORROSION RESISTING
UNABLE TO DECODE
(MATL) UNABLE TO DECODE

Manufacturer Part Numbers


Related Inventory

G2105279
C-050
Condition NE
C-050 Set Screw
Readily Available
G105279087
6801-08-08
Condition NE
Hydraulic Fitti
Readily Available
G105279407
5502-32-32
Condition NE
Hydraulic Fitti
Readily Available
G105279643
2404-LL-06-06
Condition NE
Hydraulic Fitti
Readily Available
G105279391
2601-04-04-06
Condition NE
Hydraulic Fitti
Readily Available
L105279-1EA
Condition NE
2-{2-[5-(2-{2-[
Readily Available
10905212
3040001052799
Condition NE
LINK
Readily Available
LS15263V08-5
5305005105279
Condition NS
SCREW
Readily Available
430R620H01
5315010527994
Condition NS
PIN
Readily Available
105.2798
Condition FN
O-RING
Readily Available
105.2797
Condition FN
O-RING
Readily Available
11599209
5340001052798
Condition NE
HARDWARE
Readily Available
1088554
5315-01-052-7996
Request
F0M1088554
5315-01-052-7996
Request


 
Top