ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-01-477-2560, 5340014772560
SEAT,HELICAL COMPRESSION SPRING

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 014772560
Codification Country
United States
Item Name Code
INC 24328
Criticality
(Y) This item does not have a nuclear hardened feature but does have other critical feature(s) such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Request Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-01-477-2560
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-01-477-2560


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-01-477-2560

National Stock Number (NSN) 5340-01-477-2560, or NIIN 014772560, (seat,helical compression spring) was assigned August 3, 2000 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. One of those part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 3 suppliers. Today, 2 suppliers are listed as Active suppliers for this NSN. Of the active suppliers, 2 suppliers are deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

This NSN is somewhat common among different platforms, belonging to 3 different weapons systems.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Feb 04, 2020, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The Government physically does not have in its possession sufficient, accurate, or legible data to purchase this part from other than current source(s). (NOTE: This code is applicable only to parts under immediate buy requirements and only as long as the deficiency is under review for resolution and appropriate recoding.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 24328. [A CIRCULAR ITEM, USUALLY HAVING A FLAT OR GROOVED FLANGE, BOSS(ES), AND/OR COUNTERBORE, DESIGNED TO ACCOMMODATE THE END OF THE SPRING. IT IS USED TO POSITION THE SPRING BUT DOES NOT ENCASE THE SPRING OR RESTRAIN LATERAL MOTION. IT MAY BE USED IN CONJUNCTION WITH A RETAINER,HELICAL COMPRESSION SPRING. EXCLUDES:WASHER (AS MODIFIED), SEAT,BALL SOCKET, AND HOLDER,SPRING. SEE ALSO ROTOR,ENGINE POPPET VALVE.]. This item does not have a nuclear hardened feature but does have other critical feature(s) such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340014772560 does not contain precious metals.

This information was last updated on .


Technical Characteristics

SPECIAL FEATURES
(FEAT) ASEAT, HELICAL COMPRESSION SPRING - LOWER PLANING LINK, MLG; FINISH PER STF 1205; FINISH PER ST1723;; MACHINING REQUIREMENTS PER PS23041; HEAT TREAT TO CONDITION H1025 PER PS15227 OR MIL-H-6875;
UNABLE TO DECODE
(MATL) UNABLE TO DECODE
III END ITEM IDENTIFICATION
(AGAV) MAIN LANDING GEAR, F/A-18(E/F)
III PART NAME ASSIGNED BY CONTROLLING AGENCY
(CXCY) SEAT,SPRING
MATERIAL
(MATL) STEEL, AMS 5643
END DIAMETER
(BBRB) 1.3600 INCHES NOMINAL
END ITEM IDENTIFICATION
(AGAV) MAIN LANDING GEAR, F/A-18(E/F)
BORE DIAMETER
(ABXV) 0.8800 INCHES NOMINAL
COUNTERBORE DIAMETER
(AAWY) 1.1750 INCHES NOMINAL
CRITICALITY CODE JUSTIFICATION
(CRTL) AGAV
COUNTERBORE LENGTH
(BZDL) 0.2500 INCHES NOMINAL
FIRST STEP DIAMETER
(ABPR) 2.2500 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE
MATERIAL
(MATT) STEEL COMP 630
OVERALL HEIGHT
(ABKW) 0.3400 INCHES NOMINAL
PART NAME ASSIGNED BY CONTROLLING AGENCY
(CXCY) SEAT,SPRING
SPECIAL FEATURES
(FEAT) SEAT, HELICAL COMPRESSION SPRING - LOWER PLANING LINK, MLG; FINISH PER STF 1205; FINISH PER ST1723;; MACHINING REQUIREMENTS PER PS23041; HEAT TREAT TO CONDITION H1025 PER PS15227 OR MIL-H-6875;

Manufacturer Part Numbers


Related Inventory



 
Top