ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-01-499-1451, 5340014991451
PLATE,MOUNTING

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 014991451
Codification Country
United States
Item Name Code
INC 40223
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Request Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-01-499-1451
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-01-499-1451


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-01-499-1451

National Stock Number (NSN) 5340-01-499-1451, or NIIN 014991451, (plate,mounting) was assigned July 15, 2002 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 3 suppliers. Today, 3 suppliers are listed as Active suppliers for this NSN. Of the active suppliers, 2 suppliers are deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

This NSN is somewhat common among different platforms, belonging to 3 different weapons systems.

There has been very little demand for this national stock number. The demand for this NSN originated from less than 5 countries. Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Dec 18, 2013, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The annual buy value of this part falls below the screening threshold of $10,000 but it has been screened for known source(s). (NOTE: This code shall not be used when screening parts entering the inventory. It shall not be assigned in preference to or supersede any other AMSC.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 40223. [A METALLIC OR NONMETALLIC ITEM WHICH IS RIGID, FLAT AND GENERALLY SMOOTH. ITS THICKNESS IS SMALL IN COMPARISON TO ITS LENGTH AND WIDTH. IT IS DESIGNED FOR MOUNTING ANOTHER ITEM AND MAY HAVE DRILLED OR THREADED HOLES OR OTHER FACILITIES FOR MOUNTING TO A SUPPORTING OBJECT OR SURFACE. SEE SUPPORT, AS MODIFIED. DO NOT USE IF A MORE SPECIFIC NAME APPLIES.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340014991451 contains an unknown precious metal.

This information was last updated on .


Technical Characteristics

MOUNTING HOLE QUANTITY
(ABTJ) 4
MOUNTING CONFIGURATION
(ALGC) SQUARE PATTERN 1.500 INCHES SQUARE CENTERED ON 2.500 INCH SQUARE PLATE
UNABLE TO DECODE
(ALGC) UNABLE TO DECODE
MOUNTING HOLE QUANTITY
(ABTJ) 4 ALL HOLES
END ITEM IDENTIFICATION
(AGAV) HMMWV; 2320-01-413-3739
LENGTH
(ABRY) 2.500 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) T6 ASSN STD 1ST MATERIAL RESPONSE OR H32 ASSN STD 2ND MATERIAL RESPONSE
MATERIAL
(MATT) ALUMINUM ALLOY 6061 OR ALUMINUM ALLOY 5052
MOUNTING HOLE DIAMETER
(ABTB) 0.192 INCHES NOMINAL ALL HOLES
MOUNTING HOLE QUANTITY
(ABTJ) 44
MOUNTING HOLE TYPE
(ACHY) UNTHREADED
SHAPE
(SHPE) RECTANGULAR
PART NAME ASSIGNED BY CONTROLLING AGENCY
(CXCY) PLATE, PATCH, EVAPORATOR LINE ACCESS
SPECIAL FEATURES
(FEAT) RUBBER STAMP OR STENCIL CAGE AND P/N WITH BLACK EPOXY INK IAW-A-A-56032 IN 0.080-0.160 INCH HIGH CHARACTERS; MOUNTING CONFIGURATION: SQUARE PATTERN 1.500 INCHES SQUARE CENTERED ON 2.500 INCH SQUARE PLATE
THICKNESS
(ABNM) 0.063 INCHES NOMINAL
WIDTH
(ABGL) 2.500 INCHES NOMINAL
SURFACE TREATMENT
(SFTT) PAINT

Manufacturer Part Numbers


Related Inventory



 
Top