ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-01-501-4619, 5340015014619
CLAMP,BLOCK,SECTION

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 015014619
Codification Country
United States
Item Name Code
INC 39404
Criticality
(Y) This item does not have a nuclear hardened feature but does have other critical feature(s) such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-01-501-4619
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-01-501-4619


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-01-501-4619

National Stock Number (NSN) 5340-01-501-4619, or NIIN 015014619, (clamp,block,section) was assigned October 3, 2002 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 2 suppliers. Today, 2 suppliers are listed as Active suppliers for this NSN. Of the active suppliers, 2 suppliers are deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

This NSN is somewhat common among different platforms, belonging to 3 different weapons systems.

The 24 month forecast from the US Government for this part number has high volatility, with an estimated forecasted value of US$ 2,430. Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Aug 02, 2012, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The Government physically does not have in its possession sufficient, accurate, or legible data to purchase this part from other than current source(s). (NOTE: This code is applicable only to parts under immediate buy requirements and only as long as the deficiency is under review for resolution and appropriate recoding.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 39404. [A SINGLE PIECE OF MULTIPIECE CLAMP, BLOCK. FOR ITEMS SPECIFICALLY DESIGNED TO SERVE AS A GUIDE, SEE FAIRLEAD BLOCK AND FAIRLEAD SECTION, BLOCK. EXCLUDES:BRACKET, PIPE.]. This item does not have a nuclear hardened feature but does have other critical feature(s) such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340015014619 does not contain precious metals.

This information was last updated on .


Technical Characteristics

DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH
(AFEC) 0.2875 INCHES NOMINAL
DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER
(CWXN) 0.469 INCHES NOMINAL
DISTANCE FROM END TO FIRST MOUNTING HOLE CENTER
(CWXC) 1.062 INCHES NOMINAL
END ITEM IDENTIFICATION
(AGAV) F18 E/F
BLOCK HEIGHT
(BYGG) 0.630 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND CLAMPING HOLES
(CWXZ) 1.486 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND MOUNTING HOLES
(AXPC) 1.187 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD CLAMPING HOLES
(CWYC) 2.372 INCHES NOMINAL
CLAMPING HOLE DIAMETER
(CWWM) 0.766 INCHES NOMINAL ALL HOLES
CLAMPING HOLE QUANTITY
(CWTD) 3
CRITICALITY CODE JUSTIFICATION
(CRTL) AGAV
OVERALL LENGTH
(ABHP) 3.310 INCHES NOMINAL
OVERALL WIDTH
(ABMK) 0.575 INCHES NOMINAL
PART NAME ASSIGNED BY CONTROLLING AGENCY
(CXCY) CLAMP, BLOCK - TUBE SUPPORT, PLASTIC
MATERIAL
(MATT) PLASTIC
MOUNTING HOLE DIAMETER
(ABTB) 0.205 INCHES MINIMUM AND 0.211 INCHES MAXIMUM
MOUNTING FACILITY
(AZGM) UNTHREADED HOLE
MOUNTING HOLE QUANTITY
(ABTJ) 2
SPECIAL FEATURES
(FEAT) NYLON, GLASS FILLED PER P.S. 14280, GRADE B, CLASS 2
STYLE DESIGNATOR
(STYL) RECTANGULAR
SUPPLEMENTARY FEATURES
(SUPP) A QUANTITY OF TWO BLOCKS MUST BE SPECIFIED FOR EACH INSTALLATION (TOP AND BOTTOM)

Manufacturer Part Numbers


Related Inventory

9M702-5B4
Readily Available


 
Top