ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-01-526-3870, 5340015263870
CLAMP,BLOCK,SECTION

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 015263870
Codification Country
United States
Item Name Code
INC 39404
Criticality
(Y) This item does not have a nuclear hardened feature but does have other critical feature(s) such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Request Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-01-526-3870
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-01-526-3870


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-01-526-3870

National Stock Number (NSN) 5340-01-526-3870, or NIIN 015263870, (clamp,block,section) was assigned December 16, 2004 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 2 suppliers. Today, 2 suppliers are listed as Active suppliers for this NSN. Of the active suppliers, 2 suppliers are deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over a year. There have been 2 contracts issued for this part number, with 2 awards given. The US Government has only awarded those contracts to one supplier. The last contract numbers awarded were: SPE7L125V0176, SPE7L124V9170. The total value of the awarded contracts has been US$ 4,100.00.

This NSN is somewhat common among different platforms, belonging to 3 different weapons systems.

There has been very little demand for this national stock number. The demand for this NSN originated from less than 5 countries. Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Mar 06, 2013, this NSN's acquisition method was noted as: Suitable for Competitive Acquisition. (Potential sources shall include dealers/distributors.) This part requires engineering source approval by the design control activity in order to maintain the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 39404. [A SINGLE PIECE OF MULTIPIECE CLAMP, BLOCK. FOR ITEMS SPECIFICALLY DESIGNED TO SERVE AS A GUIDE, SEE FAIRLEAD BLOCK AND FAIRLEAD SECTION, BLOCK. EXCLUDES:BRACKET, PIPE.]. This item does not have a nuclear hardened feature but does have other critical feature(s) such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340015263870 does not contain precious metals.

This information was last updated on .


Technical Characteristics

MOUNTING FACILITY
(AZGM) UNTHREADED HOLE
CLAMPING HOLE DIAMETER
(CWWM) 0.390 INCHES NOMINAL ALL HOLES
END ITEM IDENTIFICATION
(AGAV) F/A-18 E/F
BLOCK HEIGHT
(BYGG) 0.394 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND CLAMPING HOLES
(CWXZ) 1.311 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND MOUNTING HOLES
(AXPC) 0.625 INCHES NOMINAL
CLAMPING HOLE QUANTITY
(CWTD) 2
CLAMPING HOLE DIAMETER
(CWWM) UNABLE TO DECODE
CRITICALITY CODE JUSTIFICATION
(CRTL) AGAV
DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH
(AFEC) 0.197 INCHES NOMINAL
DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER
(CWXN) 0.313 INCHES NOMINAL
DISTANCE FROM END TO FIRST MOUNTING HOLE CENTER
(CWXC) 0.656 INCHES NOMINAL
OVERALL LENGTH
(ABHP) 1.937 INCHES NOMINAL
OVERALL WIDTH
(ABMK) 0.394 INCHES NOMINAL
PART NAME ASSIGNED BY CONTROLLING AGENCY
(CXCY) INAVY) CLAMP, BLOCK - TUBE SUPPORT, PLASTIC
MATERIAL
(MATT) PLASTIC
MOUNTING HOLE DIAMETER
(ABTB) 0.205 INCHES NOMINAL
MOUNTING FACILITY
(AZGM) UNTHREADED HOLE(S)
MOUNTING HOLE QUANTITY
(ABTJ) 2
SPECIAL FEATURES
(FEAT) NYLON, GLASS FILLED PER P.S. 14280, GRADE B, CLASS 2
STYLE DESIGNATOR
(STYL) RECTANGULAR
SUPPLEMENTARY FEATURES
(SUPP) A QUANTITY OF TWO BLOCKS MUST BE SPECIFIED FOR EACH INSTALLATION (TOP AND BOTTOM)

Manufacturer Part Numbers


Related Inventory



 
Top