ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-01-588-1898, 5340015881898
BRACKET,DOUBLE ANGLE

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 015881898
Codification Country
United States
Item Name Code
INC 20354
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Request Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-01-588-1898
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-01-588-1898


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-01-588-1898

National Stock Number (NSN) 5340-01-588-1898, or NIIN 015881898, (bracket,double angle) was assigned September 7, 2010 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by one supplier. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Sep 08, 2010, this NSN's acquisition method was noted as: Acquire, for the first time, directly from the actual manufacturer rather than the prime contractor who is not the actual manufacturer. The Government physically does not have in its possession sufficient, accurate, or legible data to purchase this part from other than current source(s). (NOTE: This code is applicable only to parts under immediate buy requirements and only as long as the deficiency is under review for resolution and appropriate recoding.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 20354. [A RIGID ITEM USUALLY FABRICATED FROM FLAT MATERIAL, FORMING TWO ALTERNATE OR TWO ADJACENT INTERIOR ANGLES, BOTH WHICH MAY BE LESS THAN 180 DEGREES (3.141 RADIANS). IT IS DESIGNED TO POSITION, ALIGN, AND/OR SUPPORT AN ITEM. IT MAY BE REINFORCED. SEE ALSO BRACKET, ANGLE AND BRACKET (1), MOUNTING.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340015881898 does not contain precious metals.

This information was last updated on .


Technical Characteristics

END ITEM IDENTIFICATION
(AGAV) 2320-01-552-7787 TRUCK, DUMP
CENTER SECTION HEIGHT
(AHPZ) 229.7 MILLIMETERS MINIMUM AND 231.3 MILLIMETERS MAXIMUM
CENTER SECTION THICKNESS
(AHQB) 9.5 MILLIMETERS NOMINAL
CENTER SECTION WIDTH
(AHQA) 245.0 MILLIMETERS NOMINAL
FIRST LEG ANGLE
(CSSQ) 13.3 DEGREES MINIMUM AND 15.3 DEGREES MAXIMUM
FIRST LEG STYLE
(AJZU) CHAMFERED ENDS
FIRST LEG THICKNESS
(AHPW) 9.5 MILLIMETERS NOMINAL
FIRST LEG WIDTH
(AHQN) 245.0 MILLIMETERS NOMINAL
FIRST LEG LENGTH
(ADLK) 141.0 MILLIMETERS MINIMUM AND 145.0 MILLIMETERS MAXIMUM
PART NAME ASSIGNED BY CONTROLLING AGENCY
(CXCY) BRACKET, MOUNT, TAIL LIGHT, RIGHT
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) ASTM A572/A572M, GRADE 50 ASSN STD SINGLE MATERIAL RESPONSE
MATERIAL
(MATT) STEEL
SECOND LEG ANGLE
(CSSR) 13.3 DEGREES MINIMUM AND 15.3 DEGREES MAXIMUM
SECOND LEG THICKNESS
(AHPX) 9.5 MILLIMETERS NOMINAL
SECOND LEG WIDTH
(AHLF) 245.0 MILLIMETERS NOMINAL
SECOND LEG LENGTH
(ADLL) 141.0 MILLIMETERS MINIMUM AND 145.0 MILLIMETERS MAXIMUM
SECOND LEG RELATIONSHIP TO FIRST LEG
(CSSP) NOT IDENTICAL
SECOND LEG STYLE
(AKBU) CHAMFERED ENDS
STYLE DESIGNATOR
(STYL) ADJACENT ANGLES

Manufacturer Part Numbers


Related Inventory



 
Top