ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-01-601-4373, 5340016014373
PLATE,MOUNTING

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 016014373
Codification Country
United States
Item Name Code
INC 40223
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Request Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-01-601-4373
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-01-601-4373


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-01-601-4373

National Stock Number (NSN) 5340-01-601-4373, or NIIN 016014373, (plate,mounting) was assigned January 19, 2012 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by one supplier. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

This NSN is assigned to Item Name Code (INC) 40223. [A METALLIC OR NONMETALLIC ITEM WHICH IS RIGID, FLAT AND GENERALLY SMOOTH. ITS THICKNESS IS SMALL IN COMPARISON TO ITS LENGTH AND WIDTH. IT IS DESIGNED FOR MOUNTING ANOTHER ITEM AND MAY HAVE DRILLED OR THREADED HOLES OR OTHER FACILITIES FOR MOUNTING TO A SUPPORTING OBJECT OR SURFACE. SEE SUPPORT, AS MODIFIED. DO NOT USE IF A MORE SPECIFIC NAME APPLIES.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340016014373 does not contain precious metals.

This information was last updated on .


Technical Characteristics

LENGTH
(ABRY) 1.800 INCHES NOMINAL
MATERIAL
(MATT) STEEL CORROSION RESISTING
MOUNTING HOLE QUANTITY
(ABTJ) 4
MOUNTING HOLE DIAMETER
(ABTB) UNABLE TO DECODE
PART NAME ASSIGNED BY CONTROLLING AGENCY
(CXCY) BASE-IFF RETAINER
SCREW THREAD SERIES DESIGNATOR
(AJYP) UNF
SHAPE
(SHPE) FLAT
SPECIAL FEATURES
(FEAT) MOUNTING CONFIGURATION: RECTANGULAR PATTERN WITH CENTERS OF HOLES LOCATED 0.625 INCHES APART ALONG LENGTH EDGE AT A POINT 0.200 INCHES FROM LENGTH EDGE, AND 0.500 INCHES APART ALONG THE WIDTH EDGE; MOUNTING PLATE HAS THRU HOLELOCATED THRU SIDE OF PLATE ALONG BEVELED EDGED LENGTH THAT BEGINS AT A 0.570 INCH DIAMETER FOR 0.570 INCHES IN LENGTH THEN CHANGES TO A 0.310 INCH DIAMETER FOR 0.625 INCHES IN LENGTH, AND THEN CHANGES TO A 0.136 INCH DIAMETER FOR 0.770 INCHES IN LENGTH;MOUNTING PLATE ALSO HAS CUT OUT AREA ON SAME LENGTH EDGE, CENTRALLY LOCATED FOR A LENGTH OF 0.255 INCHES AND A WIDTH OF 0.490 INCHESAND A DEPTH OF 0.600 INCHES
THICKNESS
(ABNM) 0.600 INCHES NOMINAL
WIDTH
(ABGL) 1.250 INCHES NOMINAL
MOUNTING HOLE DIAMETER
(ABTB) 0.159 INCHES NOMINAL ALL HOLES
UNABLE TO DECODE
(ALGC) UNABLE TO DECODE
MOUNTING HOLE QUANTITY
(ABTJ) 44
SPECIAL FEATURES
(FEAT) MOUNTING PLATE HAS THRU HOLE LOCATED THRU SIDE OF PLATE ALONG BEVELED EDGED LENGTH THAT BEGINS AT A 0.570 INCH DIAMETER FOR 0.570 INCHES IN LENGTH THEN CHANGES TO A 0.310 INCH DIAMETER FOR 0.625 INCHES IN LENGTH, AND THEN CHANGES TO A 0.136 INCH DIAMETER FOR 0.770 INCHES IN LENGTH;MOUNTING PLATE ALSO HAS CUT OUT AREA ON SAME LENGTH EDGE, CENTRALLY LOCATED FOR A LENGTH OF 0.255 INCHES AND A WIDTH OF 0.490 INCHES AND A DEPTH OF 0.600 INCHES
MOUNTING CONFIGURATION
(ALGC) RECTANGULAR PATTERN WITH CENTERS OF HOLES LOCATED 0.625 INCHES APART ALONG LENGTH EDGE AT A POINT 0.200 INCHES FROM LENGTH EDGE, AND 0.500 INCHES APART ALONG THE WIDTH EDGE

Manufacturer Part Numbers


Related Inventory



 
Top