ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-01-623-1043, 5340016231043
BRACKET,DOUBLE ANGLE

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 016231043
Codification Country
United States
Item Name Code
INC 20354
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Request Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-01-623-1043
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-01-623-1043


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-01-623-1043

National Stock Number (NSN) 5340-01-623-1043, or NIIN 016231043, (bracket,double angle) was assigned October 31, 2013 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There are 4 manufacturer part numbers associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 4 suppliers. Today, 4 suppliers are listed as Active suppliers for this NSN. Of the active suppliers, 4 suppliers are deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Nov 01, 2013, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The Government physically does not have in its possession sufficient, accurate, or legible data to purchase this part from other than current source(s). (NOTE: This code is applicable only to parts under immediate buy requirements and only as long as the deficiency is under review for resolution and appropriate recoding.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 20354. [A RIGID ITEM USUALLY FABRICATED FROM FLAT MATERIAL, FORMING TWO ALTERNATE OR TWO ADJACENT INTERIOR ANGLES, BOTH WHICH MAY BE LESS THAN 180 DEGREES (3.141 RADIANS). IT IS DESIGNED TO POSITION, ALIGN, AND/OR SUPPORT AN ITEM. IT MAY BE REINFORCED. SEE ALSO BRACKET, ANGLE AND BRACKET (1), MOUNTING.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340016231043 does not contain precious metals.

This information was last updated on .


Technical Characteristics

CENTER SECTION HEIGHT
(AHPZ) 0.034 INCHES MINIMUM AND 0.046 INCHES MAXIMUM
CENTER SECTION THICKNESS
(AHQB) 0.034 INCHES MINIMUM AND 0.046 INCHES MAXIMUM
CENTER SECTION WIDTH
(AHQA) 0.452 INCHES MAXIMUM
FIRST LEG ANGLE
(CSSQ) 90.0 DEGREES NOMINAL
FIRST LEG LENGTH
(ADLK) 72.0 INCHES NOMINAL
FIRST LEG STYLE
(AJZU) SQUARE
FIRST LEG THICKNESS
(AHPW) 0.034 INCHES MINIMUM AND 0.046 INCHES MAXIMUM
FIRST LEG HOLE ARRANGEMENT STYLE
(AKAU) NO HOLE
FIRST LEG WIDTH
(AHQN) 0.250 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) AMS5510 NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE
PART NAME ASSIGNED BY CONTROLLING AGENCY
(CXCY) GANG CHANNEL
MATERIAL
(MATT) STEEL CORROSION RESISTING
SPECIAL FEATURES
(FEAT) BOTH LEGS HAVE NOTCHED SLIDES THAT ARE 0.065/0.075 WIDE BY 0.195/0.205 LONG ALONG THE LENGTH;CENTER OF BRACKET HAS HOLES TO ACCOMODATE NUT;CENTER TO CENTER NUT HOLE MEASUREMENT OF 2.00 INCHES TO ACCOMODATE 0.1900-32 UNJF-3B NUT
SECOND LEG ANGLE
(CSSR) 90.0 DEGREES NOMINAL
SECOND LEG LENGTH
(ADLL) 72.0 INCHES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEG
(CSSP) IDENTICAL
SECOND LEG THICKNESS
(AHPX) 0.034 INCHES MINIMUM AND 0.046 INCHES MAXIMUM
SECOND LEG WIDTH
(AHLF) 0.298 INCHES MAXIMUM
STYLE DESIGNATOR
(STYL) ADJACENT ANGLES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
(STDC) MIL-S-5002 MIL SPEC 1ST TREATMENT RESPONSE AND TWO COATS OF MIL-P-85582,TY 1,CLASS C2 PRIMER IAW MIL-F-7179 MIL SPEC 2ND TREATMENT RESPONSE
SURFACE TREATMENT
(SFTT) PASSIVATE AND PRIMER

Manufacturer Part Numbers


Related Inventory



 
Top