ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-01-628-7181, 5340016287181
BRACKET,DOUBLE ANGLE

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 016287181
Codification Country
United States
Item Name Code
INC 20354
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Request Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-01-628-7181
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-01-628-7181


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-01-628-7181

National Stock Number (NSN) 5340-01-628-7181, or NIIN 016287181, (bracket,double angle) was assigned June 6, 2014 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by one supplier. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Jun 07, 2014, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The Government physically does not have in its possession sufficient, accurate, or legible data to purchase this part from other than current source(s). (NOTE: This code is applicable only to parts under immediate buy requirements and only as long as the deficiency is under review for resolution and appropriate recoding.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 20354. [A RIGID ITEM USUALLY FABRICATED FROM FLAT MATERIAL, FORMING TWO ALTERNATE OR TWO ADJACENT INTERIOR ANGLES, BOTH WHICH MAY BE LESS THAN 180 DEGREES (3.141 RADIANS). IT IS DESIGNED TO POSITION, ALIGN, AND/OR SUPPORT AN ITEM. IT MAY BE REINFORCED. SEE ALSO BRACKET, ANGLE AND BRACKET (1), MOUNTING.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340016287181 does not contain precious metals.

This information was last updated on .


Technical Characteristics

III END ITEM IDENTIFICATION
(AGAV) 4210-01-627-0524
END ITEM IDENTIFICATION
(AGAV) 4210-01-627-0524
CENTER SECTION HEIGHT
(AHPZ) 3.590 INCHES NOMINAL
CENTER SECTION THICKNESS
(AHQB) 0.090 INCHES NOMINAL
CENTER SECTION WIDTH
(AHQA) 2.300 INCHES NOMINAL
FIRST LEG ANGLE
(CSSQ) 0.190 RADIANS NOMINAL
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
(AHRB) 1.000 INCHES NOMINAL
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
(AHRA) 1.150 INCHES NOMINAL
FIRST LEG HOLE ARRANGEMENT STYLE
(AKAU) ONE SLOT
FIRST LEG SLOT WIDTH
(AHLM) 1.260 INCHES MINIMUM AND 1.270 INCHES MAXIMUM
FIRST LEG STYLE
(AJZU) SQUARE
FIRST LEG THICKNESS
(AHPW) 0.090 INCHES NOMINAL
FIRST LEG LENGTH
(ADLK) 2.250 INCHES NOMINAL
FIRST LEG WIDTH
(AHQN) 2.300 INCHES NOMINAL
PART NAME ASSIGNED BY CONTROLLING AGENCY
(CXCY) BRACKET, AIR REGULATOR
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) ASTM B209 ASSN STD SINGLE MATERIAL RESPONSE
MATERIAL
(MATT) ALUMINUM ALLOY 6061
MOUNTING HOLE TYPE
(ACHY) PLAIN
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
(AHLW) 0.750 INCHES NOMINAL
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
(AHLV) 0.560 INCHES NOMINAL
SECOND LEG ANGLE
(CSSR) 0.190 RADIANS NOMINAL
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH
(AHLP) 1.190 INCHES NOMINAL
SECOND LEG LENGTH
(ADLL) 1.710 INCHES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEG
(CSSP) NOT IDENTICAL
SECOND LEG STYLE
(AKBU) SQUARE
SECOND LEG HOLE ARRANGEMENT STYLE
(AKCU) TWO HOLES
SECOND LEG HOLE DIAMETER
(AHLN) 0.250 INCHES NOMINAL
SECOND LEG THICKNESS
(AHPX) 0.090 INCHES NOMINAL
SECOND LEG WIDTH
(AHLF) 2.300 INCHES NOMINAL
STYLE DESIGNATOR
(STYL) DOUBLE ANGLE
III PART NAME ASSIGNED BY CONTROLLING AGENCY
(CXCY) BRACKET, AIR REGULATOR

Manufacturer Part Numbers


Related Inventory



 
Top