ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-01-633-4185, 5340016334185
BRACKET,DOUBLE ANGLE

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 016334185
Codification Country
United States
Item Name Code
INC 20354
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Request Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-01-633-4185
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-01-633-4185


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-01-633-4185

National Stock Number (NSN) 5340-01-633-4185, or NIIN 016334185, (bracket,double angle) was assigned November 21, 2014 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There are no manufacturer part numbers associated to this NSN.

This part number has not been procured by the US Government in over 5 years.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Nov 22, 2014, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The Government physically does not have in its possession sufficient, accurate, or legible data to purchase this part from other than current source(s). (NOTE: This code is applicable only to parts under immediate buy requirements and only as long as the deficiency is under review for resolution and appropriate recoding.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 20354. [A RIGID ITEM USUALLY FABRICATED FROM FLAT MATERIAL, FORMING TWO ALTERNATE OR TWO ADJACENT INTERIOR ANGLES, BOTH WHICH MAY BE LESS THAN 180 DEGREES (3.141 RADIANS). IT IS DESIGNED TO POSITION, ALIGN, AND/OR SUPPORT AN ITEM. IT MAY BE REINFORCED. SEE ALSO BRACKET, ANGLE AND BRACKET (1), MOUNTING.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340016334185 does not contain precious metals.

This information was last updated on .


Technical Characteristics

III END ITEM IDENTIFICATION
(AGAV) SLIDE RAIL, JACK PLATE, REAR (DRIVER SIDE)
III PART NAME ASSIGNED BY CONTROLLING AGENCY
(CXCY) AN/TPN-31(V) 7
CENTER SECTION HEIGHT
(AHPZ) 0.72 INCHES MINIMUM AND 0.78 INCHES MAXIMUM
CENTER SECTION THICKNESS
(AHQB) 0.44 INCHES NOMINAL
CENTER SECTION WIDTH
(AHQA) 16.58 INCHES MINIMUM AND 16.64 INCHES MAXIMUM
END ITEM IDENTIFICATION
(AGAV) SLIDE RAIL, JACK PLATE, REAR (DRIVER SIDE)
FIRST LEG ANGLE
(CSSQ) 90.0 DEGREES NOMINAL
FIRST LEG HOLE ARRANGEMENT STYLE
(AKAU) NO HOLE
FIRST LEG STYLE
(AJZU) SQUARE
FIRST LEG THICKNESS
(AHPW) 0.18 INCHES NOMINAL
FIRST LEG WIDTH
(AHQN) 16.58 INCHES MINIMUM AND 16.64 INCHES MAXIMUM
FIRST LEG LENGTH
(ADLK) 0.97 INCHES MINIMUM AND 1.03 INCHES MAXIMUM
HOLE QUANTITY
(ASXK) 3
PART NAME ASSIGNED BY CONTROLLING AGENCY
(CXCY) AN/TPN-31(V) 7
MATERIAL
(MATT) ALUMINUM ALLOY 6061
SECOND LEG ANGLE
(CSSR) 90.0 DEGREES NOMINAL
SECOND LEG LENGTH
(ADLL) 0.97 INCHES MINIMUM AND 1.03 INCHES MAXIMUM
SECOND LEG THICKNESS
(AHPX) 0.18 INCHES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEG
(CSSP) IDENTICAL
SPECIAL FEATURES
(FEAT) FINISH IS IRIDITE COAT, THEN PRIME AND PAINT. BRACKET HAS (3) TOTAL MOUNTING HOLES THAT HAVE .20 INCH DIAMETER .65 INCHES DEEP WITH .25-20UNC THREADING .50 INCHES DEEP.
STYLE DESIGNATOR
(STYL) ADJACENT ANGLES

Manufacturer Part Numbers


Related Inventory



 
Top