ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-01-644-4689, 5340016444689
BRACKET,DOUBLE ANGLE

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 016444689
Codification Country
United States
Item Name Code
INC 20354
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Request Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-01-644-4689
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-01-644-4689


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-01-644-4689

National Stock Number (NSN) 5340-01-644-4689, or NIIN 016444689, (bracket,double angle) was assigned May 7, 2015 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There are no manufacturer part numbers associated to this NSN.

This part number has been procured by the US Government within the last year, but shows no recent (last 90 days) procurement activity. There have been 5 contracts issued for this part number, with 5 awards given. There is minimal competition for this NSN. The US Government has awarded contracts to 4 different suppliers. The last contract numbers awarded were: SPE7L124V9284, SPE7L124P2713, SPE7L123V3864, SPE7L122V004Z, SPE7L122V8613. The total value of the awarded contracts has been US$ 3,258.00.

There has been very little demand for this national stock number. The demand for this NSN originated from less than 5 countries. Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on May 08, 2015, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The Government physically does not have in its possession sufficient, accurate, or legible data to purchase this part from other than current source(s). (NOTE: This code is applicable only to parts under immediate buy requirements and only as long as the deficiency is under review for resolution and appropriate recoding.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 20354. [A RIGID ITEM USUALLY FABRICATED FROM FLAT MATERIAL, FORMING TWO ALTERNATE OR TWO ADJACENT INTERIOR ANGLES, BOTH WHICH MAY BE LESS THAN 180 DEGREES (3.141 RADIANS). IT IS DESIGNED TO POSITION, ALIGN, AND/OR SUPPORT AN ITEM. IT MAY BE REINFORCED. SEE ALSO BRACKET, ANGLE AND BRACKET (1), MOUNTING.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340016444689 does not contain precious metals.

This information was last updated on .


Technical Characteristics

III END ITEM IDENTIFICATION
(AGAV) 5895-01-592-8791
III PART NAME ASSIGNED BY CONTROLLING AGENCY
(CXCY) C-CHANNEL SEAL
END ITEM IDENTIFICATION
(AGAV) 5895-01-592-8791
CENTER SECTION HEIGHT
(AHPZ) 3.00 INCHES NOMINAL
CENTER SECTION THICKNESS
(AHQB) 0.125 INCHES NOMINAL
CENTER SECTION WIDTH
(AHQA) 33.46 INCHES MINIMUM AND 33.48 INCHES MAXIMUM
FIRST LEG HOLE ARRANGEMENT STYLE
(AKAU) NO HOLE
FIRST LEG STYLE
(AJZU) SQUARE
FIRST LEG THICKNESS
(AHPW) 0.125 INCHES NOMINAL
FIRST LEG WIDTH
(AHQN) 33.46 INCHES MINIMUM AND 33.48 INCHES MAXIMUM
FIRST LEG LENGTH
(ADLK) 0.49 INCHES MINIMUM AND 0.51 INCHES MAXIMUM
HOLE QUANTITY
(ASXK) 4
PART NAME ASSIGNED BY CONTROLLING AGENCY
(CXCY) C-CHANNEL SEAL
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) ASTM B221 ASSN STD SINGLE MATERIAL RESPONSE
MATERIAL
(MATT) ALUMINUM ALLOY 6063
MOUNTING HOLE TYPE
(ACHY) PLAIN
SECOND LEG LENGTH
(ADLL) 1.00 INCHES NOMINAL
SECOND LEG THICKNESS
(AHPX) 0.125 INCHES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEG
(CSSP) IDENTICAL
SPECIAL FEATURES
(FEAT) BRACKET HAS (4) .375 INCH DIAMETER THRU HOLES IN THE CENTER SECTION. THE CENTER-TO-CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG THE LENGTH IS 32.468 INCHES. THE CENTER-TO-CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG THE WIDTH IS 1.750 INCHES. COLOR IS GREEN, CHIP NUMBER 24533 PER FED-STD-595.
STYLE DESIGNATOR
(STYL) ADJACENT ANGLES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
(STDC) MIL-DTL-5541, TYPE 1, CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE
SURFACE TREATMENT
(SFTT) CHROMATE

Manufacturer Part Numbers


Related Inventory



 
Top