ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5365-00-609-5134, 5365006095134
Cancelled -> Replaced by 4320005061225

Federal Supply Classification
FSC 5365 - Bushings, Rings, Shims, and Spacers
National Item Identification Number
NIIN 006095134
Codification Country
United States
Item Name Code
INC 26979
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(N) There is no data in the HMIRS and the NSN is in an FSC not generally suspected of containing hazardous materials.
Availability: Readily Available Qualified Suppliers: We have 1 qualified suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5365-00-609-5134
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5365-00-609-5134


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5365-00-609-5134

National Stock Number (NSN) 5365-00-609-5134, or NIIN 006095134, (spacer,plate) was assigned January 1, 1961 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN replaces 1 stock number, 4320005061225.

There are 2 manufacturer part numbers associated with this NSN. One of those part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 3 suppliers. Today, 2 suppliers are listed as Active suppliers for this NSN. Of the active suppliers, 2 suppliers are deemed design controlled or valid supply parts. ISO Group has several sources of supply for this NSN.

This part number has not been procured by the US Government in over 5 years.

There has been very little demand for this national stock number. The demand for this NSN originated from less than 5 countries. Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Jul 02, 2006, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The Government physically does not have in its possession sufficient, accurate, or legible data to purchase this part from other than current source(s). (NOTE: This code is applicable only to parts under immediate buy requirements and only as long as the deficiency is under review for resolution and appropriate recoding.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 26979. [A FLAT METAL OR PLASTIC ITEM OF VARIOUS PERIPHERAL SHAPES HAVING A SOLID (NOT LAMINATED) CROSS-SECTION. IT IS DESIGNED TO MAINTAIN A PREDETERMINED DISTANCE BETWEEN TWO SURFACES. FOR ROUND ITEMS WITHOUT A HOLE HAVING A SOLID RECTANGULAR CROSS-SECTION USE DISK, SOLID, PLAIN. FOR ROUND OR HEXAGONAL ITEMS WITH ONLY ONE HOLE CENTRALLY LOCATED AND WITH THE LENGTH (THICKNESS) EXCEEDING 25 PERCENT OF THE OUTSIDE DIAMETER OR DISTANCE ACROSS PERIPHERAL FLATS, SEE SPACER, SLEEVE. THE THICKNESS BETWEEN THE TWO PARALLEL BEARING SURFACES MUST BE 0.006 INCH, (0.152 MM) OR MORE FOR ITEMS LESS THAN 1/4 INCH (6.35 MM) ACROSS THE PERIPHERAL DIAMETER, OR SMALLEST OVERALL OUTSIDE DIMENSION, OR MUST BE 0.016 INCH (0.406 MM) OR MORE FOR ITEMS 1/4 INCH (6.35 MM) OR GREATER ACROSS THE PERIPHERAL DIAMETER OR SMALLEST OVERALL OUTSIDE DIMENSION. FOR ITEMS WITH A THICKNESS LESS THAN THOSE INDICATED ABOVE, SEE SHIM. FOR ITEMS WITH ONE HOLE CENTRALLY LOCATED CONFORMING TO THE ABOVE DIMENSIONAL CRITERIA USE WASHER, FLAT OR SPACER, RING AS APPLICABLE. WHEN THICKNESS AND/OR OUTSIDE_DIAMETER_OR_SMALLEST_OVERALL_OUTSIDE_DIMENSION_IS_DESIGNATED_AS_A_TOLERANCE/DIMENSION_THE_MAXIMUM_DIMENSION_WILL_BE_USED_TO_DETERMINE_COMPLIANCE._EXCLUDES:GASKET;_INSULATOR_(AS_MODIFIED)_AND_MOUNTING_PAD,_ELECTRICAL-ELECTRONIC_COMPONENT.____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no data in the HMIRS and the NSN is in an FSC not generally suspected of containing hazardous materials. NSN 5365006095134 does not contain precious metals.

This information was last updated on .


Technical Characteristics

OVERALL LENGTH
(ABHP) 1.748 INCHES NOMINAL
OVERALL WIDTH
(ABMK) 0.745 INCHES NOMINAL
MATERIAL
(MATT) STEEL CORROSION RESISTING
STYLE DESIGNATOR
(STYL) RECTANGULAR

Manufacturer Part Numbers


Related Inventory

M2275912-10-9
WM22759/12-10-9
Condition NE

Readily Available
01-912-109
87720
Condition FN
5/64 260-UB-UL
Readily Available
V00297
* | 101337-300 |
Condition NE
Epon Resin 826
Readily Available
9121090
NS9121090
Condition NE
NSS OEM Part #
Readily Available
N9121090
TKN9121090
Condition NE
Taski OEM Part
Readily Available
7671C5191210-9
5365-01-322-1668
Condition NE
SPACER,SLEEVE
Readily Available
1618912-109
Condition FN
Desc: SEAL; MOQ
Readily Available
1592986-109
1618912-109
Condition FN
Desc: SEAL; MOQ
Readily Available
M2275912-10-90
WM22759/12-10-90
Condition NE

Request
M2275912-10-92
WM22759/12-10-92
Condition NE

Request
M2275912-10-9290TP
WM22759/12-10-92
Condition NE

Request
M2275912-10-96
WM22759/12-10-96
Condition NE

Request


 
Top