National Stock Number (NSN) 5365-01-066-6850, or NIIN 010666850, (spacer,ring) was assigned October 16, 1978 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.
There is only one manufacturer part number associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by one supplier. Today, there are no suppliers listed as an Active supplier for this NSN. Of the active suppliers, there are no suppliers that are deemed design controlled or valid supply parts.
This part number has not been procured by the US Government in over 5 years.
This NSN is unique to one weapons system.
Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Jul 03, 2013, this NSN's acquisition method was noted as: Suitable for Competitive Acquisition. (Potential sources shall include dealers/distributors.) This part requires engineering source approval by the design control activity in order to maintain the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. Valid AMCs: 1, 2, 3, 4 and 5.
This NSN is assigned to Item Name Code (INC) 24307. [A CIRCULAR-SHAPED ITEM DESIGNED TO MAINTAIN PREDETERMINED DISTANCE BETWEEN ASSEMBLED PARTS AND/OR FOR DISTRIBUTING PRESSURE OR PREVENTING ENDWISE MOVEMENT BETWEEN MEMBER PARTS. IT HAS A SOLID CROSS-SECTION AND TWO FLAT PARALLEL BEARING SURFACES. THE DISTANCE BETWEEN THE BEARING SURFACES PERPENDICULAR TO THE AXIS OF THE CENTRALLY LOCATED HOLE SHALL NOT EXCEED 25 PERCENT OF THE OUTSIDE DIAMETER. THE DIAMETER OF THE CENTRALLY LOCATED HOLE MUST EXCEED 75 PERCENT OF THE OUTSIDE DIAMETER. EXCLUDES:LAMINATED ITEMS. FOR ITEMS MANUFACTURED FROM IMPREGNATED GRAPHITE OR LUBRICATED NONMETALLIC MATERIALS, EXCLUDING FELT OR PLASTICS, SEE GASKET. FOR ITEMS MANUFACTURED FROM LUBRICATED PLASTICS, SEE BEARING, WASHER, THRUST. FOR ITEMS MANUFACTURED FROM LUBRICATED FELT, SEE FELT, MECHANICAL, PREFORMED. EXCLUDES:DISK, VALVE; INSULATOR WASHER; AND SHIM. SEE ALSO SPACER, PLATE AND SPACER, SLEEVE.]. The item is a non-aviation Critical Safety Item (CSI) whose failure will result in serious damage to equipment or serious injury or death to personnel. There is no data in the HMIRS and the NSN is in an FSC not generally suspected of containing hazardous materials. NSN 5365010666850 contains an unknown precious metal.
This NSN is associated to Schedule B 7415290000: copper screws, nuts, bolts, rivets, and other fasteners not threaded. The Schedule B End Use is listed as finished metal shapes. NAICS classification category 332722: bolt, nut, screw, rivet, and washer manufacturing.
This information was last updated on Sep 01, 2024.