ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5910-00-763-4009, 5910007634009
Cancelled -> Replaced by 5910007841009

Federal Supply Classification
FSC 5910 - Capacitors
National Item Identification Number
NIIN 007634009
Codification Country
United States
Item Name Code
INC 00007
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5910-00-763-4009
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5910-00-763-4009


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5910-00-763-4009

National Stock Number (NSN) 5910-00-763-4009, or NIIN 007634009, (capacitor,fixed,ceramic dielectr) was assigned March 11, 1968 in the Federal Logistics Information System (FLIS). This NSN replaces 1 stock number, 5910007841009.

There are 4 manufacturer part numbers associated with this NSN. One of those part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 6 suppliers. Today, 4 suppliers are listed as Active suppliers for this NSN. Of the active suppliers, 2 suppliers are deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Jun 02, 2006, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The annual buy value of this part falls below the screening threshold of $10,000 but it has been screened for known source(s). (NOTE: This code shall not be used when screening parts entering the inventory. It shall not be assigned in preference to or supersede any other AMSC.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 00007. [A CAPACITOR, WHOSE CAPACITANCE VALUE CANNOT BE ADJUSTED OR VARIED, HAVING A CERAMIC DIELECTRIC. IT MAY BE A SINGLE UNIT, OR CONSIST OF TWO OR MORE FIXED UNITS WHICH CANNOT BE SEPARATED.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5910007634009 contains an unknown precious metal.

This information was last updated on .


Technical Characteristics

TERMINAL LENGTH
(ABJT) 1.500 INCHES NOMINAL
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION
(CQWM) 500.0 DC SINGLE SECTION
TERMINAL SURFACE TREATMENT
(CWSG) SOLDER
TERMINAL DIAMETER
(AEBT) 0.028 INCHES NOMINAL
CAPACITANCE VALUE PER SECTION
(CQBQ) 7.500 PICOFARADS SINGLE SECTION
RELIABILITY INDICATOR
(AARG) NOT ESTABLISHED
VOLTAGE TEMP LIMITS PER SECTION IN PERCENT CAPACITANCE CHANGE
(CQFB) -3.0 TO 3.0 WITHOUT VOLTAGE APPLIED SINGLE SECTION
VOLTAGE TEMP LIMITS PER SECTION IN PERCENT CAPACITANCE CHANGE
(CQFB) -3.0/+3.0 WITHOUT VOLTAGE APPLIED SINGLE SECTION
BODY STYLE
(AAQL) W/O MTG FACILITIES, AXIAL TERMINALS
BODY LENGTH
(ADAQ) 0.220 INCHES MAXIMUM
NONDERATED OPERATING TEMP
(CQJJ) -55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM
TOLERANCE RANGE PER SECTION
(CRTP) -5.00/+5.00 PERCENT SINGLE SECTION
TERMINAL TYPE AND QUANTITY
(TTQY) 2 UNINSULATED WIRE LEAD
CASE MATERIAL
(CWJK) PLASTIC
SCHEMATIC DIAGRAM DESIGNATOR
(AEBZ) NO COMMON OR GROUNDED ELECTRODE(S)
NONDERATED OPERATING TEMP
(CQJJ) -55.0 DEG CELSIUS MINIMUM AND 85.0 DEG CELSIUS MAXIMUM
MATERIAL
(MATT) PLASTIC CASE
TOLERANCE RANGE PER SECTION
(CRTP) -5.00 TO 5.00 PERCENT SINGLE SECTION
TEST DATA DOCUMENT
(TEST) 12909-401288 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
BODY DIAMETER
(ABPM) 0.160 INCHES NOMINAL

Manufacturer Part Numbers


Related Inventory

25-401-288
Condition FN
G2042.26R-2T26S
Readily Available
04-01288
64802-10
Condition NE
SCREW AN509-8R1
Readily Available
14-01288
752-453
Condition NE
PIPER PA18-95,-
Readily Available
K54012880
TOK54012880
Condition NE
Tornado OEM Par
Readily Available
G401288806
230-SBLK
Condition NE
Set Screw Conne
Readily Available
G401288677
A-RC80HX50
Condition NE
80 Hvy Roller C
Readily Available
G4012881
12U285
Condition NE
Rope, Manila, T
Readily Available
G401288868
242-SW
Condition NE
Set Screw Coupl
Readily Available
22FL50
401288
Condition NE
Reducing Tee: 2
Readily Available
843854-01288

Condition NE
Vega Tools 2160
Readily Available
NAS1836C08-11
5325013401288
Condition NS
INSERT PANEL
Readily Available
NAS1836C08-11
5325-01-340-1288
Condition NE
Insert - Length
Request


 
Top